水力碎浆机 福建轻机 ZDS系列

application:
d-type hydrapulper is more suitable for
pulping occ, commercial waste paper
continually or in batch. it can discharge
the heavy impurities from a separately
settling box so as to protect equipment
from damage by heavy partials, and also
discharge plastic pieces.
design features:
thanks to d-shaped vat, the way of
generating turbulence in the conventional
pulper has been changed, the turbulence
is intensified and so the paper bale is
quickly soaked into the liquid, in this way
the moving path of waste paper in pulper
is improved and the capacity of pulper
increases. it can shorten the pulping
time, reduce energy consumption and
increase the specific capacity per unit of
volume.
用 途：
适用于occ、商品废纸等的间歇或连续碎解，重杂质在单独的废物沉降箱内排放，防止设备被重金属损坏，并可排除塑料。
结构特点：
采用d型槽体，改变了传统碎浆机产生的涡流形式，增加碎浆机中浆流的湍动和涡流方向，使纸捆快速浸入液面以下，以改进废纸原料在
碎浆机中的移动路径来提高碎浆机生产能力。可缩短碎解时间，降低能耗，提高单位容积的生产能力。
主要技术参数 main technical data
zds系列d型水力碎浆系统
design features:
the system consists of d-type hydrapuler, ragger, cutting machine, dregs well, grab bucket, impurity separator, drum screen and plc controller.
this system is used for breaking waste box cardboard and other waste paper as well as removing impurity. the main features of d-type
hydrapulper are the use of d-type vat and energy-saving vieques rotor to make the contact between waste paper and rotor more quickly
and frequently. compared with the traditional hydrapulper, it could shorten the time of pulp breaking and increase productivity without
increasing the volume and power. d-type hydrapulper rotor and the outlet tray are above the bottom surface of pulper vat to form a lowpressure
flow area around the rotor so as to make the coarse impurities flow from the heavy impurity outlet into the dregs well during
pulping and then discharge impurities by grab bucket regularly. affected by turning pulp flow, the winding impurities in waste paper
are twisted into the rope, which can be pulled out by the ragger. the remaing pulp and light impurities flowing into the dregs well will
be sent to the impurity separator for procession with periodicity. the processed accept is integrated with the pulper accept and then
the pulp will enter the next working procedure. after washed, the coarse impurities will be sent to the drum screen for discharge out
of the system. the recycled pulp will flow into the pulper. the working procedure of the complete system will be under control of plc
controller. according to impurities in the raw material, controlling time of each procedure can be adjusted at any time. at the same time
of continuous pulping, the coarse impurities are discharged to avoid impurities grinding in the process of pulping, to reduce the working
burden of the following screening devices as well as to improve capacity of the pulper system.
结构特点：
该系统由d型水力碎浆机、绞绳机、切断器、沉渣井、抓斗、杂质分离机、圆筒筛、plc控制部分组成。
系统用于对废箱纸板和其它废纸的碎解并除去杂质。d型水力碎浆机主要特点是采用了“d”型槽体、节能伏克斯转子，使废纸与转子的接触
更迅速，频率更高，与传统水力碎浆机相比，可缩短废纸碎解时间，在不增加动力和容积的情况下提高生产能力。d型水力碎浆机的转子
和出浆盘高出碎浆机槽体底平面，在转子周围形成一个低压流区，使碎解过程中的粗大杂质从重渣口进入沉渣井，再利用抓斗定期排出。
废纸中的缠绕性杂质在回转浆流的作用下绞成绳状，由绞绳机拉出。进入沉渣井的掺带部分浆料和轻杂质，周期性地进入杂质分离机，经
过处理后的良浆与碎浆机良浆汇合，送下一工序处理。粗大杂质经冲洗后送至圆筒筛排出系统，回收的浆进入碎浆机。整个系统工作程
序由一个plc控制器进行控制，根据原料杂质情况，各工序控制时间可随时调整。在连续碎解浆料的同时，及时排出废纸中的粗大轻重杂
质，避免碎浆过程中的杂质细碎化，减轻后续净化筛选设备的负担。