HKW电源变压器可恢复温度保险丝KSD9700恒温开关质量保证
更新时间:2019-09-16 11:44:46 信息编号:6850549 发布者IP:14.112.213.147 浏览:45次- 供应商
- 惠州市华恺威电子科技有限公司 商铺
- 认证
- 资质核验:已通过营业执照认证入驻顺企:第6年主体名称:惠州市华恺威电子科技有限公司组织机构代码:441322000156980
- 报价
- 人民币¥.46元每
- 额定电流电压
- 5A250V
- 寿命
- 10000
- 型号
- HKW KSD9700
- 关键词
- 温控开关,热敏开关,温度开关,热保护器
- 所在地
- 博罗县石湾镇明月二路26号
- 手机号
- 15015396189
- 联系人
- 李小姐 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
HKW9700-H-G系列热保护器
技术规格书
(Technical Specification)
文件编号:HKW/QS-WKQ.03
Part Number产品型号 HKW9700-F-H 50~150 华恺威专业各类热保护器温度开关与您携手共创美好未来!更多产品请访问官网:www.hkw9700.com
地址:惠州市博罗县石湾镇明月二路26号3楼 技术咨询李小姐:15015396189电话:0752-3095516邮箱:sales1@hkw9700.com
编制
审核
批准
hanfeng
xielihua
lihai
2012-6
2012-6
2012-7
产品用途 HKW9700-F-H型热保护器具有体积小、外壳绝缘、动作灵敏、寿命长等特点,
适用于新能源电池,电机、电源,光灯镇流器、变压器、汽车马达、集成电路及
一般电气设备的过热过流双重保护作用。
HKW9700-F-H thermal protector has small dimension; insulation shell;
sensitive and long life time. Its widely use in new energy battery;
motor; power; ballast; transformer;integrated circuit and
electrical equipment’s overheat and overload double protection.
2 结构特点Structural features
HKW9700-F-H系列热保护器是采用一定几何形状的双金属片,无需辅助机构,仅靠双金属片的自身感温和电流热效应,使双金属元件的状态发生快速变化,直接带动触点实现自动切断和接通电路,起到过热、过载保护作用。
HKW9700-F-G thermal protector use unique bimetal and don’t need more auxiliary parts. Using bimetal Self-sensing temperature and Current thermal effect to change the bimetal’s shape to control the electric circuit cut off or contact on. Overheat and overload double protection.
3 安规认证 (certification):CQC18002202372 CQC180022022369
UL E502318
KC ZU02105-19001
TUV B1039300001
ROHS AGC01409190101101-001 REACH AGC01409190101101-003
华恺威专业各类热保护器温度开关与您携手共创美好未来!更多产品请访问官网:www.hkw9700.com
地址:惠州市博罗县石湾镇明月二路26号3楼 技术咨询李小姐:15015396189
电话:0752-3095516 邮箱:sales1@hkw9700.com
4 产品外形dimension
Plastic shell塑壳:20*8*4MM; 铁壳:20*7.8*3.8
Contact type动作分为:常开/常闭 Normal closed or normal opened
热保护器的外壳 可以配安装支架。Optional mounting bracket
5 产品性能performance
5.1额定电流rated power(COS∮=0.7)
DC 12V-12A 24V-8A、AC 250V-5A 125V 7A 可订做10A
5.2断开温度action temp:30℃~150℃; 复位温度reset temp 20℃~110℃。
5.3抗拉力试验:产品的引线端应能承受大于或等于20N拉力,导线无断裂、滑出。
Tensile test:≥20N,No breaks or slips out of the wire
5.4绝缘电压:Insulation voltage
a.产品在断开时的引线之间应能承受AC660V,历时1min而无击穿闪络现象;
In the power off state the insulation voltage between two wires should accept AC660V one minute withoutbreakdown and flashover.
b.产品引线与绝缘外壳之间能承受AC1800V,历时1S而无击穿闪络现象;
The insulation voltage between the wires and shell should accept AC1800V 1 second withoutbreakdown and flashover.
5.5绝缘电阻:在正常条件下,引线与绝缘外壳之间的绝缘电阻在100MΩ以上。
Insulation resistance:≥100MΩ
5.6接触电阻:产品的接触电阻应不大于50mΩ。
Contact resistance:≤50mΩ
5.7耐高温试验:产品置于额定动作温度50℃的空气环境中保持96h。
High temperature test:The product is kept in an air environment over 50°C for 96 h
5.8耐低温试验:产品置于-40℃空气环境中保持96h。
Low temperature test:The product is kept in an air environment of -40°C for 96 h
5.9抗振试验: 热保护器应能承受振幅1.5mm,频率变化10~55Hz,扫描变化周期3~5次/min,
振动方向X、Y、Z,每个方向各连续振动2h。
Anti-vibration test:The thermal protector should be able to withstand an amplitude of 1.5mm, a frequency change of 10 to 55Hz, and a scan change period of 3 to 5 times/min.
The vibration directions X, Y, and Z are continuously vibrated for 2 h in each direction.
5.10跌落试验:产品自0.7m高度自由落下1次。
Drop test:The product is free to fall from a height of 0.7m one time.
5.11抗压试验:产品应能承受100N静压力1min。
Compression test:The product should be able to withstand 100N static pressure for 1min
5.7,5.8,5.9,5.10,5.11项试验后应满足下列条件:
The additional condition after the 5.7---5.11 test.
a. 断开温度变化应在初期值的+7℃以内;
The tolerance of off temp within±7℃
b.接触电阻应在100mΩ以下;
Contact resistance≤100mΩ
c.外形应无明显变形;
he shape should be free of obvious deformation
d.导线无开裂损伤。
No cracking damage to the wire
6 寿命 life time
产品在额定电压、电流、功率因数为0.7的条件下,外加热源使其动作4000次,应满足下面条件:
The product is rated at voltage, current and power factor of 0.7.after 4000 cycles action
a断开温度变化应在初始值的+5℃以内; The tolerance of off temp within ±5℃.
b接触电阻应在50mΩ以下; contact resistance≤50mΩ.
c继续试验至6000次后能动作;cycle life time over 6000 times.
7 其它事项:matters need attention
7.1断开温度检测的升温速率应控制为1℃/1min;
7.1The temperature rise rate for disconnection temperature detection should be controlled to 1°C / 1 min
7.2使用过程中产品不能承受强烈冲击力及压迫力;
7.2The product cannot withstand strong impact and pressure during use.
地址:惠州市博罗县石湾镇明月二路26号3楼 技术咨询李小姐:15015396189
8 热保护器动作复位温度参考表action /reset temperature reference table
序号 item
断开温度 off temp
闭合温度
Reset temp
序号 item
断开温度
off temp
30
30±3℃
≥20℃
95
95±5℃
70±15℃
35
35±3.5℃
≥25℃
100
100±5℃
40
40±4℃
≥30℃
105
105±5℃
75±15℃
45
45±4.5℃
≥33℃
110
110±5℃
50
50±5℃
≥35℃
115
115±5℃
80±15℃
55
55±5℃
42±6℃
120
120±5℃
85±15℃
60
60±5℃
45±8℃
125
125±5℃
65
65±5℃
48±10℃
130
130±5℃
90±15℃
70
70±5℃
50±12℃
135
135±5℃
95±15℃
75
75±5℃
53±14℃
140
140±5℃
100±15℃
80
80±5℃
55±15℃
145
145±5℃
85
85±5℃
60±15℃
150
150±5℃
105±15℃
90
90±5℃
65±15℃
155
155±5℃
110±15℃
9 可选配安装支架:Optional mounting bracket
10本标准未涉及事项或客户有其它要求另行订立。
A supplementary agreement is accept for more matters and customer’s requirements.
- 厂家直销温度开关过热保护器免费送样温控开关限温器认证齐全CCC0.45元/
品牌:华恺威 - 源头厂家直销电吹风暖风机恒温热敏开关定制热保护器17AM+PTC0.70元/
品牌:华恺威 - 厂家直销美容美发器材TM22突跳式温控器KSD301温度控制开关0.70元/
品牌:华恺威 - 控制板电路可恢复温度保险丝金属膜熔断器厂家定做AUPO温度保险丝0.30元/
品牌:华恺威 - 厂家直销定制陶瓷外壳温控高温温度控开关KSD BW9700质量保证UL0.58元/
品牌:华恺威 - 源头厂家直销定制设制空调热保护器JUC-31F量大价优温度保护器温控开关0.65元/
品牌:华恺威