●性能范围:Range of performance:
1、Zui高工作压力4.0MPa 1,
the maximum working pressure of 4.0 MPa
2、流量范围 1~1000m3/h 2, 1 ~
1000 m3 / h flow range
3、温度范围-20~120℃ 3-20
~ 120 ℃, temperature range
4、介质粘度
1~3000mm2/s,降低转速可达到106mm2/s
介质粘度对双螺杆泵性能影响较大,泵的名义排量是指在特定粘度条件下的排量,为保证泵能在较高效率下工作,在试验不充分时,建议按下列粘度条件选择转速:介质粘度cSt转速r/min
<4001500 400 ~12001000 1200~3600750。
4, 1 ~ 3000 was/s, medium viscosity reducing speed can reach
106 was/s medium viscosity influence the performance of double
screw pump, pump displacement refers to the specific viscosity of
conditions in the name of the displacement, in order to ensure the
pump can work in high efficiency, when the test is not sufficient,
suggestion choice speed on the viscosity of the following terms and
conditions: medium viscosity cSt speed r/min < 4001500 400 ~
12001000, 1200 ~ 400.
●双螺杆泵有密封式和不密封式两种类型,按介质从一端还是从两端进入啮合空间,双螺杆又被分为双吸式和单吸式两种结构。双螺杆泵是外啮合的螺杆泵,它利用相互啮合,互不接触的两根螺杆来抽送液体。双螺杆泵为一种双吸式非密闭的双螺杆泵。一端伸出泵外的主动螺杆由原动机驱动。主动螺杆与从动螺杆具有不同旋向的螺纹。螺杆与泵体紧密贴合。从动螺杆是通过同步齿轮由主动螺杆带动的。Double
screw pump has sealed and not enclosed two types, according to the
medium from the side or from both ends into space meshing, double
screw was divided into double suction type and structure of single
suction type two kinds.Screw pump, twin screw pump is the external
gear utilizing the mesh each other, mutual contact of two screw to
pumping liquid.Double screw pump is a kind of double suction not
airtight double screw pump.Active outside the side out of the pump
screw driven by a prime mover.Driving screw and driven screw thread
with different handedness.Screw pump body and tightly.Driven screw
is driven by synchronous gear by the active screw.
●双螺杆泵作为一种容积式泵,泵内吸入室应与排出室严密地隔开。因此,泵体与螺杆外圆表面及螺杆与螺杆间隙应尽可能小些。同时螺杆与泵体、螺杆与螺杆间又相互形成密封腔,保证密闭,否则就可能有液体从间隙中倒流回去。Double
screw pump as a positive displacement pump, the pump suction
chamber should be closely separated and discharge chamber
inside.Therefore, the pump body and screw cylindrical surface and
screw and screw clearance should be as small as possible.Screw pump
body and at the same time, each other between the screw and screw
and form a sealed chamber, ensure airtight, otherwise there may be
liquid backflow from the gap.
●双螺杆泵可分为内置轴承和外置轴承两种形式。在内置轴承的结构型式中轴承由输送物进行润滑。外置轴承结构的双螺杆泵工作腔同轴承是分开的。由于这种泵的结构和螺杆间存在的侧间隙,它可以输送非润滑性介质。此外,调整同步齿轮使得螺杆不接触,同时将输出扭矩的一半传给从动螺杆。正如所有螺杆泵一样,外置轴承式双螺杆泵也有自吸能力,而且多数泵输送元件本身都是双吸对称布置,可消除轴向力,也有很大的吸高。Double
screw pump can be divided into internal bearing and the outer
bearing two forms.In the built-in bearing structure bearing
lubrication by conveying material.Working with external bearing
structure of the double screw pump bearings are separated.Owing to
the pump structure and side clearance between screw, it can
transport non-lubricative medium.In addition, the adjustment of the
synchronous gear makes the screw does not contact, at the same time
the output torque of the half to driven screw.Like all of the screw
pump, external bearing type twin-screw pump, and most are double
suction pump element itself symmetric arrangement, can eliminate
the axial force, also has a lot of high absorption.
●双螺杆泵系列产品分为单吸双螺杆泵和双吸双螺杆泵两大类。该系列产品具有特殊的螺杆型线和与之配套的特殊结构,广泛适用于石油、化工、冶金、钢铁、电力、船舶、制药、食品、建材等各种行业,其适用介质之多、输送范围之广、应用工况之复杂是其它泵类产品无法比拟的。这些特点也使得该系列泵具有潜在的使用发展前景。Double
screw pump series products are divided into single suction of two
kinds of double screw pump and double suction double screw
pump.This series of products have special screw lines and form a
complete set with the special structure, widely used in petroleum,
chemical industry, metallurgy, steel, electricity, shipbuilding,
pharmaceutical, food, building materials and other industries, by
as much as its applicable medium, transmission range wide,
application condition of the complex is unmatched by other pump
product.These features also makes the use of this series of pumps
with potential development prospects.
●泵体内装有两根左、有施单头螺纹的螺杆,主动螺杆2由动力机驱动转动时,靠同步齿轮1带动从动螺杆3转动。两根螺杆以及螺杆与泵体.
之间存在着间隙,该间隙靠齿轮和轴承保证。其间隙大小,取决于液体粘度、工作压力等因素。由于每根螺杆两端螺纹的旋向相反,螺杆转动时,由螺杆啮合线形成的泵工作腔。Equipped
with two left in the pump body, a single thread screw, active screw
driven by engine 2 turns, driven by synchronous gear 1 driven screw
3 rotation.Two screw and screw and pump body. There is a gap
between the gap by gear and bearing.The gap size, depends on the
liquid viscosity, pressure and other factors.Because each thread
rotate to the opposite on both ends of the screw, the screw
rotates, formed by the screw meshing line pump working
chamber.
●该型泵采用双吸式结构,螺杆两端处于同一压力腔中,轴向力可以自行平衡。两端轴承采用外装式,单独采用润滑油(脂)润滑,因而不受输送介质的影响。两螺杆间用一对同步齿轮驱动,螺杆齿面间并不接触,而留有一微小间隙,介质中的杂质并不能对螺杆齿面产生直接的磨损(除冲刷外)。
除一些小排量泵外(2W.W4.0以下),一般在泵体上都带有内流式安全阀,当排放压力超过额定值时,有一定的保护作用。
泵体上的进出口方向有两种,一为水平进,水平出;二为水平进,垂直向上出;用户可根据自己需要选择。This type pump
adopts double suction type structure, at the same pressure in the
cavity on both ends of the screw, the axial force can balance
itself.Both ends of bearing mounted outside using, lubricated by
lubricating oil (grease) separately, and therefore not affected by
the medium.With a pair of synchronous gears drive between the two
screw, the screw does not contact between tooth surfaces, and leave
a small gap, the impurities in medium can not be directly on the
screw tooth surface wear (except wash).Except a few small
displacement pump (below 2 w. W4.0), generally contain flow relief
valve on the pump body, when the discharge pressure exceeds rating,
has certain protective effect.There are two kinds of the direction
of the import and export on the pump body, one for level,
level;Secondly, level, vertical;User can choose according to their
own needs.
双螺杆泵相关业绩:
输送糖蜜泵
W2KSE-34W63变频减速整机 配电机:YCJ71-2.2KW-399 流量:1.3m3/h 压力:0.5Mpa
港口卸油泵:
W6.4ZK90Z1M1W73双螺杆泵; 配电机:Y280S-4-75KW 流量:100m3/h;压力:1.0Mpa
V6.4Zi-75M3W73立式双螺杆泵;配电机:Y37KW-4;流量:100m3/h;压力:0.6Mpa
码头卸油泵:
W6.4ZK-75Z3M1W73双螺杆泵;配电机:YB45KW-4;流量:100m3/h;压力:0.6
W7.2 ZK-43M1W73双螺杆泵;配电机:YB75KW-4;流量:100m3/h;压力:0.6Mpa
W7.2ZK57Z1M1W73双螺杆泵;配电机:YH55KW-4;流量:100m3/h;压力:0.8Mpa
原油中转泵:
W7.3Z75Z1MbW81双螺杆泵;配电机:YVP75KW-6;流量:100m3/h;压力:1.0Mpa
W6.4ZK90Z1M1W73双螺杆泵;配电机:YX3-75KW-4;流量:100m3/h;压力:1.0Mpa
W6.4ZK-90Z3M1W73双螺杆泵;配电机:Y75KW-4;流量:107m3/h;压力:1.2Mpa
轻柴油供油泵
W4.1ZK27M1W73双螺杆泵;配电机:Y22KW-4;流量:10m3/h;压力:2.0Mpa
W4.1ZK27M1W73双螺杆泵;配电机:YB22KW-4;流量:10m3/h;压力:2.0Mpa
W3.1ZK-30Z1M1W73双螺杆泵;配电机:YB7.5KW-4;流量:10m3/h;压力:0.4Mpa
输送液体硫磺泵
W5kse-40M2W78双螺杆泵;配电机:YBVP11KW-6;流量:10m3/h;压力:0.3Mpa
W7.3ZK-75Z0M1W80双螺杆泵;配电机:Y315-6B3;流量:110m3/h;压力:0.6Mpa
W6.4ZK-100M1W75双螺杆泵;配电机:YBH37KW-4;流量:118m3/h;压力:0.6Mpa
W6.4ZK-90M1W73双螺杆泵;配电机:Y37KW-4;流量:120m3/h;压力:0.4Mpa
输送沥青泵
V7.2Zi-57M3W73双螺杆泵;配电机:Y45KW-4;流量:120m3/h;压力:0.6MPa
W7.2ZK-57Z1M1W72双螺杆泵;配电机:YB132KW-4;流量:120m3/h;压力:2.5Mpa
W6.4ZK-100Z3M1W73双螺杆泵;配电机:YB18.5KW-4;流量:131m3/h;压力:0.2Mpa
沥青混合料专用泵
W3.1ZK-40M1W74双螺杆泵;配电机:YB7.5KW-4;流量:13m3/h;压力:0.4Mpa
W3.1ZK-40M1W73双螺杆泵;配电机:YB7.5KW-4;流量:15m3/h;压力:0.4Mpa
W7.3Z112MbW80双螺杆泵;配电机:Y90KW-6;流量:166M3/H;压力:1.0Mpa
W7.3Z112MbW80双螺杆泵;配电机:YB90KW-6;流量:166m3/h;压力:1.0Mpa
齿轮箱滑油泵
V7.2ZK-75Z1M1W73双螺杆泵;配电机:YH110KW-4;流量:168m3/h;压力:
W2.1ZK-24M1W73双螺杆泵;配电机:YH132S-6-3KW;流量:2.4m3/h;压力:0.6Mpa
W7.2ZK-94M1W73双螺杆泵;配电机:Y90KW-4;流量:200m3/h;压力:1.0Mpa
高粘度液体泵
W7.2ZK-94Z2M1-W75双螺杆泵;配电机:YB2 75KW-4;流量:200m3/h;压力:0.62Mpa
W7.2ZK-94M1W72A双螺杆泵;配电机:YH90KW-4;流量:200m3/h;压力:0.8Mpa
W5.2Z40Z1MbW81双螺杆泵;配电机:Y30KW-6;流量:20m3/h;压力:1.0Mpa
W3.1ZK-58Z1M1W73双螺杆;配电机:YB11KW-4;流量:20m3/h;压力:0.4Mpa
输送石蜡泵
W4.1ZK-48M1W73双螺杆泵;配电机:Y15KW-4;流量:25m3/h;压力:0.4Mpa
W5kse-65M4W75双螺杆泵;配电机:YB11KW-4;流量:25m3/h;压力:0.5Mpa
MW6.5ZK25Z0M1W81双螺杆泵;配电机:YB250M-4B3-55KW;流量:25m3/h;压力:4Mpa
抽石蜡泵
W4.1ZK-56M1W75双螺杆泵;配电机:YBH15KW-4;流量:26.5m3/h;压力:0.8Mpa
W4.1ZK56M1W73双螺杆泵;配电机:YB15KW-4;流量:26.6m3/h;压力:0.8Mpa
W7T.3Z-130Z0MBW80双螺杆泵;配电机:Y355S-6;流量:263;压力:1.2
W7.2ZK124Z1M1W73双螺杆泵;配电机:YB45KW-4;流量:270m3/h;压力:0.23Mpa
W7T.3Z-85Z0MBW80双螺杆泵;配电机:Y315L1-4;流量:273;压力:1.2
W7T.2ZK28M1W73双螺杆泵;配电机:Y132KW-4;流量:28m3/h;压力:3.5Mpa
W2kse-24M1W63双螺杆泵;配电机:YB1.5KW-4;流量:2m3/h;压力:0.4Mpa
抽沥青泵
W2.1ZK-14Z2M1W73双螺杆泵;配电机:YB100L2-4B3D;流量:3.4;压力:0.4
W7T.2ZK-94Z1M1W73双螺杆泵;配电机:YB110KW-4;流量:300m3/h;压力:0.6Mpa
W7.2ZK-112M1W73双螺杆泵;配电机:YH132KW-4;流量:300m3/h;压力:0.8Mpa
抽粘胶液泵
W6kse-50M4W75双螺杆泵;配电机:YB11KW-4;流量:30m3/h;压力:0.5Mpa
W5kse-65M2W63双螺杆泵;配电机:YHB15KW-4;流量:30m3/h;压力:0.6Mpa
W6kse-30M4W77双螺杆泵;配电机:Y37KW-2;流量:39.7m3/h;压力:1.2Mpa
抽重质燃油泵
W2.1ZK-14M1W82双螺杆泵;配电机:Y2.2KW-4;流量:3m3/h;压力:0.4Mpa
W3kse-40M1W77双螺杆泵;配电机:YB4KW-6;流量:3m3/h;压力:1Mpa
W4.2Z70Z1MbW81双螺杆泵;配电机:Y180L-4-22KW;流量:40m3/h;压力:1.0Mpa
W6kse-67M4W75双螺杆泵;配电机:YB15KW-4;流量:40m3/h;压力:0.5Mpa
油气混输泵
W4.2Z70Z1MbW81双螺杆泵;配电机:YX3-22KW-4;流量:40m3/h;压力:1.0Mpa
W5.1ZK-54M1W73双螺杆泵;配电机:YB22KW-4;流量:44m3/h;压力:0.8Mpa
W5.2ZK-78M1W80双螺杆泵;配电机:Y45KW-6;流量:45m3/h;压力:1.5Mpa
抽煤焦油泵
W5.1ZK-54M1W73双螺杆泵;配电机:Y75KW-4;流量:45m3/h;压力:2.5MPa
W3.1ZK-20Z3M1W73双螺杆泵;配电机:YB4KW-4;流量:5.1m3/h;压力:0.5Mpa
W8.4ZK-67M1W73双螺杆泵;配电机:YH200KW-4;流量:500m3/h;压力:0.8Mpa
W8.4ZK85M1W72双螺杆泵;配电机:YH280KW-4;流量:500m3/h;压力:1.0Mpa
抽炭黑油泵
W8.5ZK-100Z0M1W84双螺杆泵;配电机:YH355M-4B3-220KW;流量:500m3/h;压力:0.8Mpa
W5.1ZK65Z1M1W73双螺杆泵;配电机:Y30KW-4P;流量:50m3/h;压力:1Mpa
W5.1ZK65Z1M1W78双螺杆泵;配电机:Y30KW-4P;流量:50m3/h;压力:1Mpa
W5.1ZK-54Z1M1W77双螺杆泵;配电机:YB18.5-4;流量:50m3/h;压力:0.2Mpa
抽改性沥青泵
W4.2ZK-78Z0M1W80双螺杆泵;配电机:YB22KW-4;流量:50m3/h;压力:0.6Mpa
W7kse-75M2W78双螺杆泵;配电机:YBVP22KW-6;流量:50m3/h;压力:0.2Mpa
W6.5Z-67Z0MBW80双螺杆泵;配电机:Y250M-6;流量:54;压力:1.2
W6.4ZK-62M1W60A双螺杆泵;配电机:Y37KW-4;流量:55m3/h;压力:1.0Mpa
抽SBS沥青改性剂泵
W5.2Z-65Z0MBW80双螺杆泵;配电机:Y225M-4;流量:57;压力:1.2
W5.1ZK78M1W73双螺杆泵;配电机:Y37KW-4;流量:60m3/h;压力:1.0Mpa
W5.2Z-65Z1M1W80双螺杆泵;配电机:YB45KW-4;流量:60m3/h;压力:0.7Mpa
W8.4ZK-100Z3M1W73双螺杆泵;配电机:YB132KW-4;流量:614m3/h;压力:0.2Mapa
输送原油泵
W8.5ZK-112M1W82A双螺杆泵;配电机:YH250KW-4;流量:650m3/h;压力:0.8Mpa
W6.5Z-75Mb1W80双螺杆泵;配电机:Y15KW-6;流量:66m3/h;压力:0.1Mpa
W5.1Z-78M1W73双螺杆泵;配电机:YB45KW-4;流量:69.6 m3/h;压力:1Mpa
输送乳化沥青泵
W2.1ZK-34M1W73双螺杆泵;配电机:YB4KW-4;流量:6m3/h;压力:0.6Mpa
W3.1ZK-20Z2M1W73双螺杆泵;配电机:Y132S-4B3D;流量:7.1;压力:0.4
W6.4ZK75Z1M1W73双螺杆泵;配电机:YB37KW-4;流量:78m3/h;压力:0.8Mpa
输送重油泵
W2.1ZK-34M1W73双螺杆泵;配电机:YB7.5KW-4;流量:8.9m3/h;压力:0.6Mpa
W6.4Zi62Z1M1W73双螺杆泵;配电机:Y225M-4-45KW;流量:80m3/h;压力:1.0Mpa
W6.4ZK62Z1M1W73双螺杆泵;配电机:Y45KW-4;流量:80m3/h;压力:1.0Mpa
高粘度打胶泵
W6.5Z100MbW81双螺杆泵;配电机:Y55KW-6;流量:80m3/h;压力:1.0Mpa
W6.4ZK62Z1M1W77双螺杆泵;配电机:YB30KW-4;流量:80m3/h;压力:0.3Mpa
W6.4ZK-62M1W73双螺杆泵;配电机:YB75KW-4;流量:80m3/h;压力:2.0Mpa
沥青混合料专用泵
W6.5ZK-75Z0M1W84双螺杆泵;配电机:YH225S-4B3-37KW;流量:80m3/h;压力:0.8Mpa
W6.5Z100Z1MbW81双螺杆泵;配电机:YVP55KW-6;流量:80m3/h;压力:1.0Mpa
W6.5Z100MbW81双螺杆泵;配电机:YVP55KW-6;流量:80m3/h;压力:1.0Mpa
燃油输送泵
W6.4ZK62Z1M1W73双螺杆泵;配电机:YX3-45KW-4;流量:80m3/h;压力:1.0Mpa
W6.4ZK-100Z3M1W77双螺杆泵;配电机:Y55KW-6;流量:88m3/h;压力:1.0Mpa
W4kse-48M1W77双螺杆泵;配电机:YB7.5KW-6;流量:8m3/h;压力:1Mpa
相关产品:输送聚氨酯浆料泵