供应西门子22KW变频器

 供应西门子22KW变频器 供应西门子22KW变频器 供应西门子22KW变频器 西门子MM440变频器不带滤波器 380-480V 22KW 6SE6440-2UD32-2DB1 6SE6440-2UD32-2DB1西门子MM440变频器22KW 6SE64402UD322DB1 6SE6440-2UD32-2DB1 MICROMASTER 440，不带滤波器，3AC 380-480V +10/-10% 47-63Hz，恒转矩，额定输出功率，22 KW 过载 150%，用于 60S，200% 3 S，平方转矩，额定输出功率，30 KW 520 x 275 x 245 (H x W x D)，防护等级 IP20，环境温度 -10 - +50 ℃，不带 AOP/BOP; 产品图片： 联 系 人 ：黄 世 鹏 （ 销 售 经 理 ） 工 作 Q Q ：6 4 9 4 2 6 2 8 1 联系电话:1 8 7 0 1 8 5 2 7 1 8 工作微信:1 8 7 0 1 8 5 2 7 1 8   上海地友自动化设备有限公司本着“以人为本、科技先导、顾客满意、持续改进”的工作方针，致力于工业自动化控制领域的产品开发、工程配套和系统集成，拥有丰富的自动化产品的应用和实践经验以及雄厚的技术力量，尤其以 PLC复杂控制系统、传动技术应用、伺服控制系统、数控备品备件、人机界面及网络/软件应用为公司的技术特长，几年来，上海地友自动化设备有限公司在与德国 SIEMENS公司自动化与驱动部门的长期紧密合作过程中，建立了良好的相互协作关系。   主要优势产品西门子：S7-200CN、S7-200、Smart200、S7-300、S7-400、S7-1200、触摸屏、6FC、6SN、S120、V10、V20、V60、V80、G110、G120、6RA、伺服数控备件、NCU、MM系列变频器。 6SE6440-2UD32-2DB1 相似图像 MICROMASTER 440，不带滤波器，3AC 380-480V +10/-10% 47-63Hz，恒转矩，额定输出功率，22 KW 过载 150%，用于 60S，200% 3 S，平方转矩，额定输出功率，30 KW 520 x 275 x 245 (H x W x D)，防护等级 IP20，环境温度 -10 - +50 ℃，不带 AOP/BOP 列表价（不含增值税） 显示价格   您的单价（不含增值税） 显示价格   PDF 格式的数据表 下载 服务和支持 (手册，认证，问答...) 下载     产品 商品编号(市售编号) 6SE6440-2UD32-2DB1 产品说明 MICROMASTER 440，不带滤波器，3AC 380-480V +10/-10% 47-63Hz，恒转矩，额定输出功率，22 KW 过载 150%，用于 60S，200% 3 S，平方转矩，额定输出功率，30 KW 520 x 275 x 245 (H x W x D)，防护等级 IP20，环境温度 -10 - +50 ℃，不带 AOP/BOP 产品家族 订货数据总览 产品生命周期 (PLM) PM300:有效产品 价格数据 价格组 / 总部价格组 IB / 列表价（不含增值税） 显示价格 您的单价（不含增值税） 显示价格 金属系数 无 交付信息 出口管制规定 AL : 3D225 / ECCN : 3D202W 工厂生产时间 22 天 净重 (Kg) 16.0 Kg 产品尺寸 (W x L X H) 未提供 包装尺寸 未提供 包装尺寸单位的测量 未提供 数量单位 1 件 包装数量 未提供 其他产品信息 EAN 未提供 UPC 未提供 商品代码 85044097 LKZ_FDB/ CatalogID DA51-E 产品组 9823 原产国 中国 Compliance with the substance restrictions according to RoHS directive 阐明 RoHS 合规性 产品类别 未提供 电气和电子设备使用后的收回义务类别 没有电气和电子设备使用后回收的义务 分类     版本 分类 eClass 5.1 27-02-31-01 UNSPSC 15 39-12-20-01  |  捆绑销售：  6SE6440-2UD21-5AA1 MICROMASTER 440，不带滤波器，3AC 380-480V +10/-10% 47-63Hz，恒转矩，额定输出功率，1.5 KW 过载 150%，用于 60S，200% 3 S，平方转矩，额定输出功率，1.5 KW 173 x 73 x 149 (H x W x D)，防护等级 IP20，环境温度 -10 - +50 ℃，不带 AOP/BOP    6SE6440-2UD23-0BA1 MICROMASTER 440，不带滤波器，3AC 380-480V +10/-10% 47-63Hz，恒转矩，额定输出功率，3 KW 过载 150%，用于 60S，200% 3 S，平方转矩，额定输出功率，3 KW 202 x 149 x 172 (H x W x D)，防护等级 IP20，环境温度 -10 - +50 ℃，不带 AOP/BOP    6SE6440-2UD24-0BA1 MICROMASTER 440，不带滤波器，3AC 380-480V +10/-10% 47-63Hz，恒转矩，额定输出功率，4 KW 过载 150%，用于 60S，200% 3 S，平方转矩，额定输出功率，4 KW 202 x 149 x 172 (H x W x D)，防护等级 IP20，环境温度 -10 - +50 ℃，不带 AOP/BOP    6SE6440-2UD22-2BA1 MICROMASTER 440，不带滤波器，3AC 380-480V +10/-10% 47-63Hz，恒转矩，额定输出功率，2.2 KW 过载 150%，用于 60S，200% 3 S，平方转矩，额定输出功率，2.2 KW 202 x 149 x 172 (H x W x D)，防护等级 IP20，环境温度 -10 - +50 ℃，不带 AOP/BOP    6SE6400-0BP00-0AA1 MICROMASTER 4 BASIC OPERATOR PANEL (BOP)   Safety Integrated for SINAMICS S110 产品信息 跳转到 Overview Functions Overview The integrated safety functions of SINAMICS S110 provide highly effective application-oriented protection for personnel and machinery. SINAMICS S110 offers Extended Functions (SS2, SOS, SLS, SDI, SSM) in addition to Basic Functions (STO, SS1, SBC). The Safety Integrated functions are implemented electronically and therefore offer short response times compared to solutions with externally implemented monitoring functions. The Safety Integrated functions are fully integrated in the drive system. They can be activated via fail-safe digital inputs on the CU305 Control Unit or via PROFINET or PROFIBUS with PROFIsafe. As an alternative to controlling via terminals and/or PROFIsafe, there is also the option to parameterize several safety functions without selection. In this mode, after parameterization and a POWER ON, these functions are permanently selected. Example: "SLS without selection" can be used, for example, to monitor the maximum velocity to prevent the drive from exceeding a mechanical speed limit. For this purpose, using the "without selection" function, an F‑DI does not have to be used; an F‑CPU is also not required. Safe speed/position sensing Incremental encoders or absolute encoders can be used for safe sensing of the position values on a drive. Safe actual value sensing relies on redundant evaluation of the incremental tracks A/B that supply sin/cos signals of 1 Vpp. Only encoders of the type whose A/B track signals are created and processed using purely analog techniques can be used. The encoder signals can be input via the Sensor Modules. As an alternative, motors with an integrated DRIVE-CLiQ interface can be used. The speed or position actual values are generated directly in the motor as safe values and are transferred to the Control Unit over safe communication via DRIVE-CLiQ. The encoder must be mechanically attached in such a manner that the encoder shaft is unable to unplug or slide off. For notes on this, see IEC 61800‑5‑2: 2007, Table D.16. A list of Siemens motors that fulfill the electrical and mechanical requirements is available at: https://support.industry.siemens.com/cs/document/33512621 Motors with DRIVE-CLiQ interface are connected directly to the CU305 Control Unit. A SINAMICS Sensor Module is required to evaluate the encoder signals of motors without a DRIVE-CLiQ interface. Safe actual value sensing without encoder Some safety functions can also be operated without safety-capable encoders; implementation effort is minimal. Existing systems in particular can be updated with safety technology without the need to change the motor or mechanical system. The STO function can be used without any restrictions for all applications. The SS1, SLS, SSM and SDI functions are permissible for applications in conjunction with asynchronous and SIEMOSYN motors where the load can never cause acceleration. An encoder that is used for the purposes of motor control has no significance for the safety functions here. Licensing The Safety Integrated Basic Functions do not require a license. The Safety Integrated Extended Functions do require a license. It is of no consequence here which safety functions are used and how many. The license can be ordered as an option with the memory card. Alternatively, a single-user license can also be purchased. Safe Brake Relay The Safe Brake Control (SBC) function requires a Safe Brake Relay. The Safe Brake Relay allows safe control of electro-mechanical motor brakes. The 24 V DC solenoid of the motor brake is directly connected to the Safe Brake Relay. External surge suppressors are not required. The cable harnesses for connection to the Power Module are included in the scope of supply. With the Safe Brake Relay function, the brake is controlled in accordance with IEC 61508 SIL 2 and EN ISO 13849‑1 PL d and Category 3.   Functions Function Control Underlying function Reaction to limit overshoot External setpoint input effective Encoder required License required Basic Functions STO F-DI PROFIsafe SBC (if activated) – No No No SBC With STO (directly or following expiry of the delay time) – – – No No SS1 F-DI PROFIsafe STO following expiry of the parameterized delay time, followed by SBC (if activated) STO No No No Extended Functions SS1 with SBR F-DI PROFIsafe Safe acceleration monitoring (Safe Brake Ramp (SBR)) during braking. STO and SBC (if activated) following expiry of the parameterized delay time or if the speed falls below the minimum speed limit STO No No Yes SS2 F-DI PROFIsafe Safe acceleration monitoring (SBR - Safe Brake Ramp) during braking. SOS following expiry of the parameterized delay time SS1 → STO No Yes Yes SOS F-DI PROFIsafe – SS1 → STO Yes Yes Yes SLS F-DI PROFIsafe – STO, SS1, SS2 or SOS (can be parameterized) Yes Yes Yes SLS encoderless F-DI PROFIsafe – STO, SS1 (can be parameterized) Yes No Yes SDI F-DI PROFIsafe – STO, SS1, SS2 or SOS (can be parameterized) Yes No Yes SSM Always active, if configured – Signals that the speed has fallen below a specified value Yes No Yes