HWZYJ02---全自动外球面轴承注脂压盖机

 HWZYJ02------全自动外球面轴承注脂压盖机

主要功能：

1、 适用于外径ø35mm-ø62mm外球面轴承的注脂和双层双面盖的压装；

2、 步进电机找点定位注脂，精密定量阀控制注脂量；

3、 根据注脂后的旋转力矩检测注脂状态；

4、 双面放压密封盖、双面放压铁防尘盖；

5、 双面双层共4次分别检查压盖高度，根据设置的公差范围判断OK或NG；

6、 加工工序：圆盘供料（或连线）---第一面注脂---翻转---第二面注脂---旋转力矩检查---NG品排出---第一面压入内层密封盖---压盖检查---第一面压入外层密封盖---压盖检查---翻转---第二面压入内密封盖---压盖检查---第二面压入外层密封盖---压盖检查---NG品排出---合格品出料；

7、 智能的操作系统、7寸真彩触摸屏，参数及状态信息一目了然，操作方便、容易。

结构特点：

1、 可单机使用，也可与前工程连接后自动生产；

2、 特别针对外球面轴承内圈较高的特点而      设计的注脂对位结构，油脂准确；

3、 注脂后检测轴承旋转扭矩，间接判断注      脂是否OK；

4、 针对外球面轴承双层双面密封盖特点而

设计的分层压盖和检查方式，保证每

片盖子均准确安装到位；

5、 压盖高度检测，NG品自动剔除；

6、 所有元器件均使用精选配置，保证了

设备长期连续工作的可靠稳定。

技术指标：

无锡市惠荣自动化科技有限公司  电话：0510-85200718     传真：0510-85200728

WuXi HuiRong Automation Technology Co., Ltd.  网址：www.huirongat.com 邮@163.com

HWZYJ02 ------Auto outer spherical bearing greasing capping machine

Major functions：

1、 Applicable for double-layer double-side cap press and greasing of insert bearing with an external bearing diameter of ø35mm-ø62mm.

2、 Stepper motor accurate positioning greasing, precise quantitative valve control the volume of greasing.

3、 Check greasing status according to rotating torque after greasing.

4、 Double-sided pressed into sealed cover, double-sided pressed into the iron dust cover

5、 Manufacturing procedures: greasing on the first side -- turn over -- greasing on the second side -- rotating torque inspection -- NG ejection -- press the inner sealed the cover on the first side -- cover inspection -- press the outer sealed cover on the first side -- cover inspection -- turn over -- press the inner sealed the cover on the second side -- cover inspection --- press the outer sealed cover on the second side -- cover inspection -- NG ejection -- qualified products being finished.

6、 Intelligent operating system, 7 inches true color touching screen , parameters and states information display at the same time, easy to operate

Structuralfeatures：

1、Accurate greasing methods specially designed according to the high inner ferrule characteristics of insert bearing.

2、Indirectly determine whether greasing is OK through bearing rotating torque inspection after greasing.

3、Specially designed for layered cover and checking         methods according to the double-layer double-sides characteristics of insert bearing’s sealed         cover. Ensuring that every piece of cover are installed accurately.

4、Height check after cover, automatic elimination of         NG product.

5、All components using best quality configurations to

ensure long term working stability of equipments.

Technical parameters：

WuXi HuiRong Automation Technology Co., Ltd.  网址：www.huirongat.com 邮@163.com