山东长期供应F7mm毫米红光食人鱼LED
信息编号:385219 浏览:97次- 供应商
- 莱芜市银辉光电科技有限公司 商铺
- 认证
- 报价
- 请来电询价
- 品牌
- 国产
- 型号
- G07RC01
- 应用范围
- 发光模组
- 所在地
- 莱芜市高新区鹏泉东大街156号
- 联系电话
- 15263410985
- 手机号
- 13863457389
- 联系人
- 周勇鹏 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
品牌 | 国产 | 型号 | G07RC01 |
应用范围 | 发光模组 | 结构 | 点接触型 |
材料 | 磷铟砷化镓GaAsInP | 封装形式 | 直插型 |
封装材料 | 树脂封装 | 功率特性 | 小功率 |
频率特性 | 低频 | 发光颜色 | 红色 |
LED封装 | 无色透明封装(T) | 出光面特征 | 三角形 |
发光强度角分布 | 散射型 | 正向直流电流IF | 20(A) |
Zui高反向电压 | 8(V) |
专业制造,长期稳定供货,有现货,保质量,同类产品Zui优价格
特征:高亮度,大发光角度
主要应用范围:发光模组
详细参数参阅以下说明书
product specifications
type : 7mm piranha red led
part number: g07rc01
lens color: water clear
● features:
1.long operating life
2.instant light
3.low voltage operated
4.cool beam,safe to the touch
5.more energy efficient than incandescent and most halogen lamps
6.widely used in the lighting , industrial and electronics products.
● package outline dimension:
notes:
1、 all dimensions are in millimeters;
2、 tolerances are ±0.1mm,unless otherwise noted.
● typical electrical & optical characteristics (ta=25℃)
part number:g07rc01 |
|||||||||
absolute maximum ratings (ta=25℃) |
|||||||||
parameter |
symbol |
value |
unit |
||||||
forward current |
if |
20 |
ma |
||||||
reverse voltage |
vr |
5 |
v |
||||||
power dissipation |
pd |
80 |
mw |
||||||
soldering temperature |
tsol |
260(for 5 seconds) |
℃ |
||||||
operating temperature range |
top |
-25~+80 |
℃ |
||||||
storage temperature range |
tstg |
-30~+80 |
℃ |
||||||
peak pulsing current (1/8 duty f=1khz) |
ifp |
130 |
ma |
||||||
electrostatic discharge |
esd |
>3000 |
v |
||||||
electr-optical characteristics(ta=25℃,if=50ma) |
|||||||||
parameter |
test condition |
symbol |
value |
unit |
|||||
min |
typ |
max |
|||||||
walvelenth |
if=30ma |
λd |
620 |
--- |
630 |
nm |
|||
forward voltage |
if=30ma |
vf |
1.8 |
--- |
2.4 |
v |
|||
luminous intensity |
if=30ma |
iv |
600 |
--- |
800 |
mcd |
|||
luminous flux |
if=30ma |
φ |
3.0 |
--- |
4.0 |
lm |
|||
viewing angle at 50% iv |
if=30ma |
2θ1/2 |
--- |
140 |
--- |
deg |
|||
reverse current |
vr=5v |
ir |
--- |
5 |
--- |
μa |
|||
part number:g07rc01
●typical electro-optical characteristics curves
● reliability test items and conditions:
no. |
test item |
test condition |
sample size |
ac/re |
1 |
dc operation life |
if=dc20ma temp:room temperature test time:1000hrs |
22 |
0/1 |
2 |
hight temperature hight humidity |
temp.:+85℃ rh=85%hr test time:1000hrs |
22 |
0/1 |
3 |
thermal shock |
-35℃---~---+85℃ 20min 10s 20min test time:300cycles |
22 |
0/1 |
4 |
hight temperature storage |
hight temp.:+85℃ test time:1000hrs |
22 |
0/1 |
5 |
low temperature storage |
low temp.:-35℃ test time:1000hrs |
22 |
0/1 |
6 |
temperature cycle |
-35℃---~---+100℃ 15min 5min 15min test time:300cycles |
22 |
0/1 |
7 |
reflow soldering |
operation heating: 260℃(max.) within 10seconds(max.) |
22 |
0/1 |
● judgement criteria of failure for the reliability
※ iv:below 50% of the initial value
※ vf:over 20% of the upper limit value
※ ir:over 2 times of the upper limit value
note:measurement should be taken between 2 hours and after the test leds have been returned to
normal ambient condition after completion of each test.
part number:g07rc01
● precautions for use:
1. temperature in use
since the light generated inside the led needs to be emitted to outside efficiently , a resin with hight light transparency is used, therefore, additives to improve the heat resistance or moisture resistance(silica gel,etc) which are used for semiconductors products such as transistors cannot be added to the resin.
consequently, the heat resistant ability of the resin used for led is usually low,therefore, please be careful of the following points:
avoid applying external force,stress and excessive vibration to the resins and terminals at hight temperature. the glass transition temperature of epoxy resin ussed for the led is approximately 120-130℃. if the temperature exceeding the limit,the coefficient of liner expansion of the resin doubles or more compared to that at normal temperature and the resin will be softened.
and if some external force or stress is applied at that time, it may cause a wire damage.
2. soldering
after soldering,avoided applying external force,stress and excessive vibration until the products down to the room temperature(the same to termial leads).
3. designing
care must be taken to provide the current limiting resistor in the circuit so as to drive the led within the rated figures, also caution should be taken not to overload led with exorbitant voltage at the turning on and off of the circuit.
when using the pulse drive care must be taken to keep the average current withini the rated figures, also the circuit should be designed so as be subjected to reverse voltage when turning off the led.
4. storage
in order to avoid the absorption of moisture, it is recommended to solder led as soon as possible after unpacking the sealed bags.
5. anti-static electricity
as the blue, green, white and puples are sensitive to the esd, so during the handling, soldering , testing and packing process the anti-static measurements must be applied.otherwise the led will be damaged.
- 银辉光电 大量供应5MM白光85.00元/K
品牌:银辉光电 - 银辉光电 大量供应2*3*4蓝光150.00元/K
品牌:银辉光电 - 山东莱芜银辉光电 GPRC02 大量供应平头红光食人鱼品牌:山东莱芜银辉光电
- 银辉光电 H48WC-018 大量供应低光衰高亮度草帽灯品牌:银辉光电
- 银辉光电 大量供应7MM红光食人鱼品牌:银辉光电
- 山东供应低光衰F5(4.8)mm草帽白光LED品牌:国产
- 山东长期供应超高亮度平头红光食人鱼LED品牌:国产
- 山东长期稳定供应F5(4.8mm草帽白光led品牌:国产
- 5MM白光 银辉光电 发光(LED)85.00元/K
品牌:银辉光电 - 2*3*4蓝光 银辉光电150.00元/K
品牌:银辉光电