BM2系列摆线马达用于立式注塑机,制鞋机等
更新时间:2019-12-04 09:47:37 信息编号:2134483 发布者IP:112.235.252.198 浏览:80次- 供应商
- 山东超越液压机械有限公司 商铺
- 认证
- 报价
- 人民币¥200.00元每台
- 所在地
- 山东省济宁市高新开发区内
- 联系电话
- 0537-2031618
- 手机号
- 13639449088
- 联系人
- 李庆彬 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
BM2系列摆线液压马达
1.断续工作压力指入口工作压力,连续工作压力指工作压差。
2.马达不应同时在Zui高压力和Zui大转速下工作。
3.推荐用68#抗磨液压油,粘度37-73cSt,清洁度ISO18/13。
4.马达在断续工作条件下,运行时间每分钟不得超过10%。
5.工作油温Zui高80°
6.马达满负荷工作前,应在Zui高工作压力的40%以下磨合1h。
7.马达允许Zui高背压10MPa,但推荐不要超过5MPa,超过时应接外泄油管。
1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure
2. Motor should not work under the highest pressure and the maximum speed
3. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.
4. The running time should not exceed 10% under intermittent working conditions
5. The Maximum working temperature is 80 °
6. One hour running time under 40% of maximum working pressure is recommended before full capacity working.
7. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa.a leaking pipes is needed when exceeding
BM2 连接尺寸----外形图 Dimension and Mounting data
BM2 连接尺寸----安装法兰 Mounting flange; Rabbets
BM2 连接尺寸----输出轴 Shaft
BM2 连接尺寸----油口 Port
BM2 订货信息 Ordering Information
BM2 Ordering Information
- 轴配流液压马达BM1系列用于农机200.00元/台
- OMS摆线马达 4孔菱形法兰实物图200.00元/台
- 摆线液压马达锚杆钻机用200.00元/台
- BM5系列液压马达的参数及功率200.00元/台
- 摆线液压马达BM5无轴承系列200.00元/台
- BM3系列液压马达小吊专用200.00元/台
- ZD-100液压制动器200.00元/台
- QJM系列摆线液压马达的尺寸及连接200.00元/台