BM5系列液压马达的参数及功率
更新时间:2019-12-04 09:48:19 信息编号:2115123 发布者IP:112.235.249.202 浏览:421次- 供应商
- 山东超越液压机械有限公司 商铺
- 认证
- 报价
- 人民币¥200.00元每台
- 所在地
- 山东省济宁市高新开发区内
- 联系电话
- 0537-2031618
- 手机号
- 13639449088
- 联系人
- 李庆彬 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
BM5系列摆线液压马达
结构特点
BM5马达是一种端面配流马达。其结构特点:
• 先进的端面配流设计,低速转动平稳。
• 先进的轴密封设计,能承受高背压。
• 先进的配油机构设计,
具有磨损自动补偿功能。
• 双列圆锥滚子轴承设计能够承受较大的径向力。
• 多种法兰、输出轴、等安装连接形式。
BM5 motor is a disc valve type gerolor
motor.
Characteristic
features:
• Advanced design
in disc distribution flow, which can provide improved performance
at low speed.
•Advanced design of shaft seal, which can bear higher
pressure.
•Advanced distribution mechanism design, which has the automatic
compensation function.
•Double-rolling bearing design,
which permit higher radial loads.
•A variety of connection types of
flange; Rabbet:, output shaft and oil port.
主要性能参数 Main Specification
1.Zui大压力指入口Zui大压力,连续工作压力指工作压差.
2.马达不能同时在Zui高压力和Zui大转速下工作.
3.在断续工作条件下,运行时间每分钟不能超过10%.
4.推荐用68#抗磨液压油,粘度37-73cSt,清洁度ISO18/13
5.Zui高工作油温80°
6.马达满负荷工作前,应在Zui高工作压力的40%以下磨合1h.
7.马达允许Zui大背压10MPa,但推荐不要超过5MPa,超过时应接外泄油管.
1. Intermittent means the entrance of the maximum
pressure; continuous working pressure means the differential
pressure
2. Motor should not work under the
highest pressure and the maximum speed
3. The running time should not exceed
10% under intermittent working conditions
4. Recommending N68 anti-wear
hydraulic oil, viscosity 37-73cSt, cleanliness
ISO18/13.
5. The Maximum working temperature is
80 °
6. One hour running time under 40% of
maximum working pressure is recommended before full capacity
working.
7. The maximum allowable back
pressure is 10MPa, but the recommended back pressure should not
exceed 5MPa.a leaking pipes is needed when exceeding
BM5 标准系列连接尺寸----外形图 Dimension and Mounting data
BM5标准系列 连接尺寸----输出轴 Shaft
BM5标准系列连接尺寸----油口 Port
BM5 标准型订货信息 Ordering Information
bm5 Ordering Information
BM5摆线马达订货信息中选定型号及产品编号,点
我们的其他产品
- 摆线液压马达BM5无轴承系列200.00元/台
- 液压绞车1.5吨200.00元/台
- 煤矿用坑道钻机用马达200.00元/台
- 提升液压绞车2吨200.00元/台
- 摆线液压马达的选用BM1200.00元/台
- 摆线液压马达锚杆钻机用200.00元/台
- OMS摆线马达 4孔菱形法兰实物图200.00元/台
- 轴配流液压马达BM1系列用于农机200.00元/台
- BM2系列摆线马达用于立式注塑机,制鞋机等200.00元/台
- BM3系列液压马达小吊专用200.00元/台