T4T5支架变频调速老化线｜环型链条输送支架老化线|LED老化线新报价

T4T5支架老化线
一、设备项目： T4T5支架老化线
二、规格参数：12000L×1400W×800H（mm）
三、数    量：1条
四、设备结构：环型链条输送、链板式老练、变频调速
五、功能特点：本设备专用于T5 T4支架的老练，通过对支架的高压、常压、低压、漫游、冲击高温等电压区的老练。根据欧美等不同地区电压，可老化110V的支架。电压调节范围宽，动力系统采用变频调速系统，操作方便。
六、基本配置和构造：
1. 动力：电机采用台湾产1.5KW的电机， 100型WPS1：60的减速机，台湾进口爱德利2HP变频器，变频无级调速，线速度0—6M/min可调。
2. 机身、机架：机架采用50×40钢管焊接制作而成；机身上下护边采用130×23老化线专用铝合金型材，护板采用1.5mm的冷板折弯制作而成，支脚配镀锌可调脚杯。
3. 输送链条：采用上海链条厂出产的C212一寸双节距单则耳双孔链条。每条长约20米。
4. 老化链板：采用2mm冷板弯轧成1400×148×18mm，全线共140块，每块板装4套快速灯管专用灯管接插头和灯管卡夹具，灯管接插头分600mm、900mm、1200mm三种规格；并配装6A高分断小型断路器；链板底部安装二路导电系统（铜质），每路安装两个导电块，每块板共装2个。
5. 日产量：本老化线一次可同时老化560套支架，老化时间约为一个小时；每天按工作10小时计算，一天的产量为5600套支架。
6. 导电槽：全线上下各配二路导电槽轨，采用绝缘胶板，装配不锈钢导电条。
7. 挡光罩：在线体面上设挡光护罩，采用有机玻璃板与铝型材组合而成。有效的衰减节能灯强光，更好的保护眼睛。
8. 恒温区：恒温系统采用电加热式完成，设一段两个2000W/套电热式发热盘，温度自动恒温常温-80℃，数字温控指示。
9. 全线电压区：10KW共 4个调压器，线体共设计6个区，调压器3个0—250V可调，1个调压器0—300V可调。（具体分布按甲方要求而定）。
10. 电器控制：电压、温控指示采用数字显示式，整个系统采用PLC控制，调压器4个，采用1个配电控柜安装。在拉身上配急停开关方便上灯时能即时停止。
11. 机体颜色：全线链板黑色喷塑，铝合金型材为原色，其余为电脑白色。

以上是老化线的详细信息，如果您对老化线的价格、厂家、型号、图片有什么疑问，请联系我们获取老化线的Zui新信息。

英文流水线标准方案：
PVC Horizontal Belt Assembly Line Production Plan &
I. Project: Connected Type PVC Belt Conveyer
II. Dimensions: 12000L × 500W ×730H (mm)
III. : 3 set
IV. Features: PVC belt Conveying, roller driving, electromagnetic
speed control
V. Functional features: This e is applicable to various
plants with flow production fsmall-medium size material
conveying. The driving system adopts electromagnetic speed regulation system, which is stable,
secure, convenient quiet.
VI. Materialion Remarks
1. Power: The motors use Hongling Br0.75KW motors manufactured by Jiangmen MotCo.,
Ltd, Yashiba Br70 model 1:40 peed reducer made in Taiwan, Wuzhou Brmagnetic speed
regulatwith stepless speed regulation. Linear speed at 0-2M/min may be regulated freely.
2. Machine body stand: made of 50×40 rectangle steel pipe by welding. Supports are made
with ?25mm galvanized roller, arranged with pitch of 25mm. The stbars are e with
galvanized adjustable cells. Machine head tail are made of 1.2mm cold plate, the machine
body is 2m per section.
3. Conveying belt: green lightweight conveying PVC belt imported from Holland, 2mm
thick, 500mm wide, total 12m long, which is of seamless thermal shrinkage ring connection.
4. Light stlighting: H-shape light stand, one per 2m, made of 40×20×1.5mm rectangle
steel pipe, 1.26m high, with 2000×50×25×0.8mm coated traceway fconnecting power. The
40W single daylight lamp tube stis used, with one stper 1.4m, arranged along both sides.
5. Worktable: Long worktable of 730×490×730mm, table board made 15mm plywood, affixed
with blue fire-resistant board on face T-shaped plastic edge; supports legs made of
25×25×1.5mm rectangle steel pipe, fixed with galvanized adjustable soles at the bottom. L25mm
angle iron arranged along two sides of machine.
6. Work Power: made of 2000×50×25×0.8mm galvanized traceway, set under the machine belt,
with triphase biphase sockets along two sides (1m/one socket).
7. Operation card: Two operation card stands are set under the light stand, made of H-shape
aluminum guide rail. At each work position is arranged a 300×400×1.5mm transparent glass.
8. Gas pipe: A gas supply pipe is set in thedle of light stand, made of 4cm galvanized water
pipe, with one tap plug per 1m.
9. Machine body color: Machine metal surface will be of fruit-green coating (other colors are