进口杜笙混床离子交换树脂

杜笙 tulsion?a-23 均粒强碱型阴离子树脂 强碱型 , 均粒阴离子交换树脂 适用于超纯水系统的混床用离子交换树脂 strong base, medium exchange capacity monosphere type-i anion exchange resin tulsion® a 23 ups 强碱型离子交换树脂 ,是一款苯乙稀系列具有四级氨的高品貭 type-1阴性离子交换树脂。并同时拥有的物理及化学穏定品貭。可应用于汽电共生发电厂冷凝水处理及超纯水系统中的混床, 去除水中的阴性离子 。 tulsion® a 23 ups其均匀的颗粒直径, 能取代传统的离子交换树脂而得到更好的处理水貭及减少压力损, 可以和tulsion® t-42 ups 一起搭配使用于2b3t及超纯水系统的混床 。 typical characteristics – 基本特性 型式(type):strong base anion exchange resin 主体結構(matrix structure):polystyrene copolymer 功能基(functional group): ammonium type-i 離子型式(ionic form):chloride 均匀系数(uniformity coefficient):max. 1.25 平均粒径(harmonic mean size)580 + 50 um. 全交换容量(total exchange capacity):1.30 meq/ ml 含水份(moisture content (approx.)):40- 48 % ph范围(ph range):0 to 14 溶解率(solubility):insoluble in all common solvents. 允许温度(maximum temp. stability):60°c (140ºf) 微粒含量(fines content):less than 0.5% through 50 u.s. mesh 密度(backwash settled density):42 to 44 lbs/ft3 (670-710 g/l) shipping weight:730 g / lit (approx.) operation conditions – 操作条件 操作温度 (operation temp.) max c:60 树脂床高度 (resin bed depth) mm:800 采水流量 (service flow rate) maxi:60 m3/hr/m3 逆洗流量(backwash flow rate):5 to 10 m3/hr/m3 逆洗空间(backwash expansion):50 to 70 % 再生药剂 (regenerant):naoh 再生药剂用量(regeneration levels):40 to 160 gms naoh / liter 再生药剂加药时间(regeneration contact min.):30 – 60 mins 再生流量 (regeneration flow rate):5 to 10 m3/hr/m3 再生慢洗 (regeneration slow rinse):2 bv mini. 快洗 (fast rinse):采水流量service flow rage 快洗 水量 (fast rinse volume):4 to 6 bv 杜笙tulsion? t-42 ups --------------均粒强酸形阳树脂 , 氢 h+ / 钠 na+ 均粒强酸性阳离子适用于超 纯水的可再生混床系统 monosphere strong cationic ion exchange resin for regenerable mb 杜笙tulsion® t-42 ups 強酸型阳性離子交换樹脂 ,是一款有較高的交换容量 ,及同时擁有絕佳的物理及化學穏定品貭。可应用於汽电共生发电廠冷凝水处理及混床系統, 去除水中的阳性離子 。 杜笙 tulsion? t-42 ups 其均勻的颗粒直径, 能取代传统的離子交换樹脂, 並可以减少壓 力损, 可以和 杜笙tulsion® a-23 ups 一起搭配使用於2b3t及超纯水可再生的混床。 typical characteristics – 基本特性 型式(type):strong acid cation exchange resin 主体結構(matrix structure):cross linked polystyrene 功能基(functional group):sulphonic 物理形式(physical form):moist spherical beads. 離子型式(ionic form):hydrogen (h+) 粒径particle size ( 英國mesh):particle less than 0.3mm max. 1% 均勻係数(uniformity coefficient)：1.25 min 平均粒径(mean bead size (mm))：0.58 ( +/- 0.05) 全交换容量(total exchange capacity):1.80 meq/ ml (min.) in h+ form 含水份(moisture content (approx.)):approximately 53% in h+form ph范围(ph range):0 to 14 膨脹係数(swelling (approximately)):-7% from na+ to h+ form. 密度(backwash settled density):800-840 g/l in h+ form；830-870 g/l in na+ form 允许温度(maximum temp. stability):120°c in h+ form；140°c in na+form 溶解率(solubility):insoluble in all common solvents. operation conditions – 操 作 条 件 Zui大操作溫度(operating temperature , max 0 c):120 操作ph范围(operating ph range ):0 – 14 Zui小樹脂床高度(bed depth , mini mm):800 Zui大(service flow rate ,maxi ):120 m3/hr/ m3 逆洗水量(backwash flow rate):9 to 25 m3/hr/ m3 逆洗浮動空間(back wash expansion):40 to 75% 再生藥剤(regenerant ):hcl, h2so4 for h+ form, 再生藥剂用量(regeneration levels. ):30 to 120 gms hcl/ lit.；40 to 250 gms h2so4/ lit. 再生藥剂浓度(regeneration concentration):3 - 5% hcl, 1.5 to 3% h2so4 Zui少通再生藥剂时间(regeneration contact time, mini):-20 min. 再生流量(regeneration flow rate ):5 to 16 m3/hr/ m3 regeneration slow rinse:2 bv mini. 快洗用水(fast rinse ):service flow rate. 快洗水量(fast rinse volume):2 to 3 bv