五金冲床 高速冲床 新艺

自动冲床
自动冲床适用于连续性冲压一些工作程序复杂的片料，如：不锈钢片、铜片、铁片、铝片或塑胶片等，供制造各式表带、首饰、匙链、电制配件、文具、塑胶珠光片等制品。　　因冲床是全自动化，只要按下手制，即能将一卷新片料连续冲压完毕，节省大量时间和劳工，降低成本 ..
自动冲床规格：（600lb~6000lb）(automatc press specification cast iron)
式　样　　model600lb1000lb1200lb1500lb2000lb3000lb4000lb6000lb
Zui大冲床力（顿）　capacity(tons)68101416202440
Zui大冲程（寸） length of stroke(inches)3/4~1+1/41~1+1/41~21+1/2~21+1/2~22~2+3/42~32~3+3/4
冲压次数／分 number of stroke/min100~200100~14080~10080~10080~10060~9060~9060~90
曲轴直径（寸） dia of crank-shaft(in)1+7/822+1/42+1/22+3/433+1/24+1/4
冲头至台机距离（可调节） （寸）
distance between bolster and ram (adjustable)(in)1~21~21~21~21~1+1/22~2+1/22~2+1/22~3
冲床台面尺寸　（寸）dimensions of bolster(in)前后 front to back6+1/2789+1/2101112+3/415+1/2
宽width9+1/412+1/213+1/214+7/817+1/418+5/823+7/823+7/8
厚 thickness7/8111+3/81+3/81+1/21+3/41+7/8
横输送器之行程　（寸）stroke of side delivery device(in)2+1/2333+1/22+3/4~43~655~10
前输送器之行程　（寸）stroke of front delivery device(in)1+1/21+3/4222334~5
冲头孔规格
specification on punch shaft holes孔间中心距
distance between centres1+1/22222+1/22+1/244~5
孔数 number of holes21~22~32~32~332~32~3
孔径 dia of holes3/43/43/43/411+1/21+1/21+1/2
虎口（寸） length of daylight(in)5+3/46+7/878+5/8910+1/21217+3/8
电动机 motor(hp)111+1/22345+1/27+1/2
净重（约重）　（磅）　weight(approximately)(ibs.)60010001200040006000
送料夹辘
feeder夹辘外径 dia. of feeder2+13/162+13/162+13/162+13/1644~54~5
夹辘长度 length of feeder33446
17000/