工控机D/A I/O A/D 板卡
信息编号:622746 浏览:322次- 供应商
- 承德市联创计控设备有限公司 商铺
- 认证
- 报价
- 人民币¥2000.00元每台
- 品牌
- 承德联创
- 型号
- LC
- 准确度等级
- 1
- 所在地
- 承德开发区东区
- 联系电话
- 0314-5902009
- 手机号
- 13832401271
- 厂长
- 史连春 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
品牌 | 承德联创 | 型号 | LC |
准确度等级 | 1 | 皮带倾角 | 1(°) |
过载能力 | 11111(%) | 环境温度 | 111(℃) |
环境湿度 | 111(%) | 电源电压 | 220(V) |
printing and displaying system of weighfeeder user’s guide
1. brief instruction
this system is a system that provides running mode, grinding mode and dynamic mode on a computer screen, as a result the current modes of e can be seen at a glance. the actual feed rate, current output and the last output are displayed on the screen of the computer as well. it can print all the values mentioned above and the parameter sheet. in any case, the system applies an accurate basic data for the economic and management.
2. operating and displaying
1)start
turn on the power of the computer, then “printing and displaying system of weigh feeder” is appeared. click the related sub-interface, then the corresponding sub-interface is opened.
2)displaying and operating for running the sub-system interface
①displaying contents:
the 1st line----collective fault lamps of each weigh feeder
the 2nd line ----actual feed rate of each weigh feeder
the 3rd line ----names of materials conveyed by each weigh feeder
the 4th line ----appearance drawing of each weigh feeder
the 5th line ---- feeding mode of each weigh feeder
the 6th line ---- appearance and running modes of belt
the 7th line ---- accumulation output value of each weigh feeder
the 8th line ---- appearance drawings of the control computer and the grinder and also running mode of the grinder and the feed rate at the entrance of the grinder (the total actual feed rate of the three weigh feeders)
the 9th line ---- clearance buttons and conform buttons to clear all the displayed troubles
②operating
once a trouble displayed, double-click “conform(故障应答)” button .if there is still alarm, check the e by trained person please.
3. displaying interface of the alarm sheet
the alarm details are displayed here.
4. displaying and operating for setting parameters
①displaying contents
all the system parameters of each weigh feeder are displayed here.
②operating
click the corresponding number to modify the parameter. the number will turn into a white box. then you can enter the new data by the keyboard. after the data is entered, press the enter key, thus the new data will be appeared on the screen.
③the formulation of actual feed rate
displayed value ={[imitated value (input value v)- zero point value (v)]/reading value from the flow meter (v)}* rated value of the feed rate (t/h)
5. displaying and operating for printing sheets
①displaying contents
“selection button(选择按钮)”, “view button(浏览按钮)” and “print button(打印按钮)” are displayed here.
②operating
click the“selection button(选择按钮)”to select what you want to view and print.
click the“view button(浏览按钮)”to view what you want.
click the quit/exit in the menu to return to last interface.
click“print button(打印按钮)”to print what is selected.
6. output interface
①displaying contents
the current output and the total outputs of the current shift are displayed here, the last output and the total outputs of the last shift are also displayed, and the clearance button of the counter as well.
②operating
click the “clearance button of the counter(计数器清零按钮)” when relief of shift. the output value of the current shift is sent to the output counter of the last shift, the output value of the last shift will be lost. the output counter of the current shift will be cleared out. another turn of weighing starts.
7. stop
click right key of the mouse, a sub-menu is appeared. then click the return button by left key, you will be back to the main interface; click the right key of the mouse in the main menu, there will be sub-menu; then click the quit/exit button to return to the interface of windows98, click“start button(开始按钮)”here, then“close button(关闭按钮)”, you can power off when “you can close the computer safely now(现在可以安全的关闭计算机了)” is appeared. .
system parameters sheet
no. |
parameters |
value |
unit |
note |
1 |
zero point value of the feed rate for gypsum |
1 |
v |
|
2 |
zero point value of the feed rate for ore slag |
1 |
v |
|
3 |
zero point value of the feed rate for treated materials |
1 |
v |
|
4 |
reading value of the feed rate for gypsum |
4 |
v |
|
5 |
reading value of the feed rate for ore slag |
4 |
v |
|
6 |
reading value of the feed rate for treated materials |
4 |
v |
|
7 |
rated value of the feed rate for gypsum |
6 |
t/h |
|
8 |
rated value of the feed rate for ore slag |
12 |
t/h |
|
9 |
rated value of the feed rate for treated materials |
100 |
t/h |
|
10 |
maximum of the feed rate for gypsum |
12 |
t/h |
|
11 |
maximum of the feed rate for ore slag |
24 |
t/h |
|
12 |
maximum of the feed rate for treated materials |
200 |
t/h |
|
13 |
minimum of the feed rate for gypsum |
0 |
t/h |
|
14 |
minimum of the feed rate for ore slag |
0 |
t/h |
|
15 |
minimum of the feed rate for treated materials |
0 |
t/h |
- 德国HBMc3-500KG称重传感器荷重传感器13,000.00元/个
品牌:HBM - 德国HBMc3-500KG称重传感器荷重传感器16,000.00元/个
品牌:HBM - 配料秤 槽式给料机 承德联创类型:槽式给料机
- 定量给料机配料秤电机减速机SEW SA67/SA7710,000.00元/台
品牌:SEW - 高品质定量给料机 联创 DEL25,000.00元/台
品牌:联创 - 皮带秤控制器(仪表LCCONT)3,800.00元/台
品牌:联创 - 德国HBM-PW10A称重传感器荷重传感器850.00元/个
品牌:HBM - 定量给料机 槽式给料机 承德联创类型:槽式给料机