生物颗粒热油锅炉 生物质锅炉

 生物质颗粒热油锅炉  

原意生物质颗粒热油锅炉可保持循环油出油温度达到300℃，可保持单向油比常温提高60℃，热效率高达95%，低碳环保。

yuanyi biomass pellet hot oil boiler can keep the circulation oil temperature reached 240℃, can keep the unidirectional water than normal temperature increased 50℃, thermal efficiency as high as 90%, low carbon environmental protection

产品特点product features

1、出油Zui高300℃温度，比燃油、燃气锅炉节能40%～60%。

  the oil temperature up to 240 deg c than oil, gas boiler, energy saving 40% to 60%.

2、独特大燃烧室设计，增大炉膛辐射受热面积，缩小锅炉体积，降低nox的排放。

  unique high combustion chamber design, increase the chamber radiation heating area, reduce the boiler volume, reduce the emission of nox

3、采用国际“四炉膛、六回程、全湿背”结构技术。

  use the top "four furnace, six return, all wet back structure" technology

4、在炉胆上添加散热片系统，增大受热面积，提高热效率，增加炉胆寿命。

  add heat sink system in furnace, increasing the heating area, improve the thermal efficiency, increase the service life of the furnace

5、设置多个检修口和功能口，维护简单方便。

   a plurality of maintenance and function, maintenance is simple and convenient

6、多炉膛过桥处和气化燃烧室采用特种耐火材料制作，大大提高设备使用年限。

   multiple hearth at the bridge and gasification combustion chamber adopts special refractory material, greatly improve the service life of equipment

7、内置除尘和余热回收实现无烟无尘排放，烟气末端排放温度低于100℃。

   built in dust removal and recovery of waste heat to achieve a smoke-free clean emissions, flue gas emission temperature lower than 100℃end

8、锅炉前后烟箱采用多级密封方式，保证不会泄露。

   boiler smoke chamber of the multistage sealing, guaranteed not to leak

9、严格按照国家锅炉标准进行生产，出厂前经过压力和x射线检测。

  production in strict accordance with the national standard boiler, before they leave the factory after the pressure and x raydetection

产品性能product performance

产品用途product use

工业运用：为涂装线前处理、电镀液加热、纺织印染，食品行业等提供热能。

industrial application: for the pretreatment of painting line, plating liquid heating, textile printing and dyeing, foodindustry andprovide heat

鞋材厂加温：pu鞋底灌注、海棉弹性体灌注、橡胶成形、港宝片烘烤等成型线的加温

shoe factory heating: heating pu sole perfusion, sponge elastomer perfusion, rubber molding, hong bao sheet baking molding line

本公司图片、价格、产品属性仅供参考，不做交易价格，具体以实物为准，欢迎来电咨询！

本产品的加工定制是是，安装方式是组装锅炉，品牌是原意机械，型号是5组机110万卡，燃烧方式是室燃炉，循环方式是自然循环锅炉，出口压力是常压，锅炉用途是工业锅炉，燃料耗量是15~30千克/小时，适用范围是工业运用鞋材厂脚轮厂橡胶制品厂聚氨酯制品厂，结构形式是立式，适用燃料是生物颗粒