深圳工业冷水机冷冻机冷却机制冷机冰水机制冰机
更新时间:2015-06-22 21:45:31 信息编号:3503772 发布者IP:124.42.255.10 浏览:72次- 供应商
- 深圳市文惠同利机械设备有限公司 商铺
- 认证
- 资质核验:已通过营业执照认证入驻顺企:第10年主体名称:深圳市文惠同利机械设备有限公司组织机构代码:440301112461874
- 报价
- 人民币¥6800.00元每台
- 制冷量
- 9.3KW
- 型号
- WHTL-1HP
- 外形尺寸
- 900*560*900MM
- 关键词
- 工业冷水机,工业冷冻机,工业冷却机,工业制冷机,工业冰水机,工业制冰机
- 所在地
- 广东省深圳市光明新区田寮第五工业区18栋
- 联系电话
- 0755-66803931
- 手机号
- 13632618161
- 联系人
- 罗朝刚 请说明来自顺企网,优惠更多
产品详细介绍
产品简介
▲ 性能稳定:采用多个压缩机并联使用。每个压缩机自带一个独立的制冷回路。即蒸发器、冷凝器也完全独立;所有压缩机由统一的微电脑控制系统指挥,逐个开、关机,相互之间绝不会相互干扰,加上该品牌机全部采用原装制作,单机故障率极低,综合以上原因,可以保证该系列机有着高度稳定的性能,在长年连续运行情况下之,而无需再购其它备用机。
▲ 省电节能:采用多个中小功率压缩机并联使用,开、关机时对电网的干扰极小,随着负荷的变化,机组便自动确定开机的数量,保证开启的压缩机处于工作状态,从而有效节约电能。
▲ 使用寿命长:蒸发器、冷凝器设计非常合理,并且置于压缩机上方,在整个运行过程中,绝大部分润滑油始终停留在压缩机内,保证压缩机的良好润滑。
▲ 此系列机型可定做超低温型(可低至零下40度)
▲ performance and stability: the use of multiple parallel compressors,each compressor comes with a separate cooling circuit that is the evaporator and condenser are completely independent; all compressor microcomputer control system by the unified command, to open one by one, off each other will not interfere with each other between, plus the original authentic brand of machine used in all production stand-alone failure rate is very low,the above reasons,we can ensure that the machine has a series of highly stable performance,long years of continuous operation in case the first choice, without having to repurchase another spare machine.
▲ energy saving: the number of small and medium power compressors used in parallel, open, shut down the grid when the minimum interference with the load changes, the unit will automatically determine the amount of power to ensure the open state of the compressor work in the most short-tailed bird effectively save energy.
▲ long life: evaporator, condenser design is very reasonable, and placed in the top of the compressor, the entire run, the vast majority of oil within the compressor has stopped faint, to ensure good lubrication of the compressor.
▲ these models can be custom-made series of ultra-low temperature (as low as minus 40 degrees)
特点
水冷式箱型设计,水箱内置于机组内,底部装有活动脚轮,外形美观,可随意改换安装的位置及设备,可安放于生产车间内,并具备多段能量调节适用于配套中小型生产设备(此机型需要安装配备相应的冷却水塔、冷却泵)。
water-cooled tank design, tank built into the unit, the base fitted with casters, pleasing in appearance, can easily change the location and installation of equipment can be placed in the workshop,and has multi-adjustable for supporting small and medium sized energy production equipment (this model is equipped with a corresponding need to install cooling towers,cooling pumps).
本系列冷水机均采用多机联用技术,使得冷水机性能更佳。
this series chillers are used in conjunction with multi-machine technology, making the chiller better performance
- 深圳工业冷水塔冷却塔凉水塔2,180.00元/台
功率:1.5KW - 深圳模温机油温机水温机温控机5,800.00元/台
功率:2KW - 深圳塑料干燥机烘干机烤料机干料机2,180.00元/台
功率:3.0 - 深圳塑料吸料机上料机送料机给料机加料机2,100.00元/台
功率:1.5KW - 深圳液压打包机压块机捆扎机18,600.00元/台
功率:5.0KW