前帮机 晖达
信息编号:3397464 浏览:144次- 供应商
- 东莞市厚街益铭鞋机设备商店 商铺
- 认证
- 报价
- 请来电询价
- 加工定制
- 否
- 品牌
- 晖达
- 型号
- HD-808
- 所在地
- 中国 广东 东莞 厚街镇桥头村南社石塘16号(S256省道旁)
- 联系电话
- 86 0769 85031451
- 经理
- 代祖明 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
前幫機
hd-808
pulling over cement lasting machine
hd-808
技術參數main technical data:
型號 |
機器木箱包裝後尺寸 |
電源 |
產量 |
重量 |
使用油壓 |
液壓油量 |
model |
packing sizel*w*h |
voltage |
productions |
n.w |
oil pressure |
hudraulic oil |
hd-808 |
1700*1260*1870mm |
ac220-415v 3p |
1800-2200 pair/8hr |
1800kgs |
50kg/cm2 |
77liters |
特點
:1、鐵弗龍束緊器與五個油壓油缸的配合,使結幫後,鞋面均勻緊貼鞋楦,幫腳的弧度與鞋楦一致,不
發角,即增進美觀度,也減輕了後續作業的難度。 2、兩段式均可調節壓力的壓頭設計,適應不同材質鞋幫的制作。
3、獨特夾爪固定設計,增加了爪子使用壽命和更換速度,且每只爪子均可獨立自動下拉,避免掃刀前進時與爪子的撞碰,並可視鞋面松緊度,選擇左右獨立自動下拉之行程動作及每對夾爪的高低兩種壓力設定,爪型可根據鞋楦的大小碼自由調整。
4、掃刀具有寸動調整功能,使不同材質的鞋面結幫控制的調整作業更為方便。掃刀兩段式下掃動作
精確地配合膠盤自動上膠,減少鞋面結幫時的報廢率。 5、內撐臺有二段上升功能供選用,配合後跟頂座動作,可防止鞋楦下滑之現象。
6、外撐臺(即膠盤)高低也可視情形自由調節,使得印膠的效果更理想化。
7、附有十字投影燈裝配,方便鞋頭校正作業。同時使新手更容易操作。
8、六方位的夾爪盤的調整功能,使得更換鞋型速度更快捷。 9、采用 plc
控制,配以觸摸屏,使得軟件功能強大,操作者十分方便選擇各機械動作先後的微調和
是否需要的動作,制造出更完美的幫腳。characteristics:1、teflon
toe band and specially balance toe band cylinder device ensure more
evenly and closely attached to lasts after lasting no protrusion
will happen so the surface becomes more beautiful and the quality
is upgraded. 2、the mechanism of toe part pressing pad adopts
adjustable2-stage pressure, which make operators have good vision.
3、each set of pincers can be individually adjusted to their
corresponding position and be functioned and controlled according
to the tension of the uppers. 4、the wiper is functioned with
inching movement and speed adjustment, which makes the whole
adjustment of last control more convenient. 5、the last support
plate is functioned with two-stage rising mechanism which can
prevent the last, slip off in conjunction with the action of heel
supporter. 6、according to necessary, the height of the nozzle plate
can be adjusted for the best cementation. 7、the machine is equipped
with cross projector assembly, which is convenient for correcting
toe
lasting, and helps new comers easily operate the machine.
8、electrics system :a: the plc controlled system and diagrammatic
operation system make the order of all mechanical operations and
the adjustment of operation time expressed in letters of figures on
the screen which make the operation and adjustment more convenient
and steady.
9、 the function of breakdown showing and self-examination can testify the all mechanical operation and electric switches from the maintenance.
本产品的加工定制是否,品牌是晖达,型号是HD-808,功率是3(Kw),生产能力是200(双/小时),工作压点是鞋头,外形尺寸(长*宽*高)是1600*1160*1770(mm),装箱尺寸(长*宽*高)是1700*1260*1870(mm),毛重是1800(Kg),净重是1600(Kg),适用厚度范围是中厚料,产品类型是二手,规格是木包装
- 二手意大利全自动钉跟机 皮鞋加工定制:否
- 二手意大利前帮机MOLILA35,000.00元/台
加工定制:否 - 进益墙式压底机 墙式压底机20,000.00元/
加工定制:否