多功能塑料球压痕硬度仪（带洛氏）现货

多功能塑料球压痕硬度仪（带洛氏）
slqy-96b
满足标准：
gb-t 3398.1-2008-塑料硬度测定仪第1部分：球压痕法
gb-t 3398.2-2008 塑料 硬度测定 第2部分：洛氏硬度
gb-t 23257-2009 埋地钢质管道聚乙烯防腐层
产品概述：
塑料球压痕硬度仪是在指用直径为5mm的钢球，在规定试验负荷作用下，垂直压入试样表面，保持30s后计算球压痕面积上所承受的平均压力测试仪。

multifunctional plastic ball indentation hardness tester (with rockwell)
slqy-96b
meet the standard:
gb-t 3398.1-2008- plastic hardness tester first parts: ball indentation method
gb-t 3398.2-2008 plastic hardness test part second: rockwell hardness
gb-t 23257-2009 polyethylene coating for buried steel pipeline
product overview:
plastic ball indentation hardness tester is refers to the use of 5mm diameter steel ball, in the specified test load, vertical pressure into the surface of the sample, the average pressure tester is calculated to keep 30s received after the ball indentation area..
 塑料球压痕硬度仪产品特点：
1、 本仪器核心控制部分通过7寸触摸屏设置参数并控制。
2、 本仪器变形采集利用国内领先的微型位移传感器技术，Zui小位移采集精度为：0.001mm，淘汰了利用数字千分表采集位移精度低、易坏及需要更换电池等缺陷
3、 设置好参数后，点开始实验后自动加载，实验结束后自动计算结果，同时压头自动复位到初始位置进行下次实验
4、 本仪器带有微型打印机，可以对试验结果进行打印。
5、 本仪器具有3种实验类型：球压痕实验、洛氏硬度、耐压实验      
塑料球压痕硬度仪技术参数：
1．初负荷：
             球压痕：9.8n
             洛氏：98.07n
2．试验负荷：
             球压痕：49n、132n、358n、612n、961n                     
             洛氏：588.4n、980.7n
3．压头直径：
            球压痕：ф5mm，ф10mm
            洛氏：ф3.175mm，ф6.35mm，ф12.7mm
4．试样高度：4mm
5．压痕深度指示Zui小分度值：0.001mm
6．计时量程：可以设定
7．计时精度：±1%
8．示值精度：±1%
9．主机变形量：≤0.04mm
塑料球压痕硬度仪主要配置及附件：
　    主机一套
　    主机压头 ￠5mm
      微型打印机一台
      使用说明书一份:product features:
1, the instrument is the core control part through a 7 inch touch screen set up parameters and control.
2, the collection and utilization of micro displacement sensor deformation technology leading, minimum displacement precision: 0.001mm, eliminated using digital micrometer ac displacement precision is low, easily broken and the need to replace the battery and other defects
3, after parameter setting, some began to automatic loading experiment, automatic calculation results after the experiment, at the same time indenter automatic reset to the initial position for the next experiment
4, the instrument with a micro printer, you can print the test results.
5, this instrument has 3 types of experiments: ball indentation experiment, rockwell hardness, withstand voltage test
technical parameters:
1 initial load:
ball indentation: 9.8n
rockwell: 98.07n
2 the test load:
ball indentation: 49n, 132n, 358n, 612n, 961n
rockwell: 588.4n, 980.7n
3 head diameter:
ball indentation: phi 5mm, phi 10mm
rockwell: phi 3.175mm, phi 6.35mm, phi 12.7mm
the 4 sample height: 4mm
5 the indentation depth indicating the minimum graduation value: 0.001mm
6: you can set time range
timing accuracy: 7 ± 1%
8: the indicating accuracy of ± 1%
9 host deformation: ≤ 0.04mm
the main configuration and accessories:
host a
the host head - 5mm
a miniature printer
using a manual

北京冠测试验仪器有限公司专注于试验方法的创新及应用，是集研发、生产、销售、售后于一体的专业试验仪器供应商！
欢迎来电咨询洽谈业务!
010-57223838