DC电源插座(SMT)DC-096D
信息编号:2674264 浏览:70次- 供应商
- 东莞市韩晶电子有限公司 商铺
- 认证
- 报价
- 请来电询价
- 加工定制
- 否
- 品牌
- hj
- 型号
- dc-096d
- 所在地
- 东莞市桥头镇田新社区商业街60号
- 联系电话
- 13712896873
- 手机号
- 13751281893
- 经理
- 陈溪煌 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
designation品名:dc socket |
model型号: |
edition版本:01 |
page页码:1 of 2 |
1.0构造tectonic |
|||
a型状、尺寸依照制品图而规定. |
|||
b外观:各部位应良好无秤锈、裂痕、电镀不良现象. appearance : the good parts should weigh no rust, cracks, electroplating ill. |
|||
2.0使用环境条件the use of environmental conditions |
|||
a环境湿度humidity:25℃~+70℃ |
|||
b相对湿度relative humidity:≤93% (+40℃) |
|||
c机械性能mechanical properties |
|||
d动作力power moves:3~25n |
|||
e端子强度terminal strength 各端子在各方面承受500克力作用下,在10秒内,无脱落、破损等不良现象,但弯曲也可. the terminals in all aspects under 500caledon role, in 10 seconds, without any loss, damage and other negative phenomena, but also bending. |
|||
4.0电气性能electrical performance |
|||
a额定电流current ratings:dc 12v1a . |
|||
b接触电阻contact resistance:50mω以下. |
|||
c绝缘电阻insulation resistance: 在端子之间各端子与壳之间加ac 500v条件下,持续1分钟测试.100mω以上.the terminal between the terminal and shell in between 500v ac conditions, sustained a minute test ω m above .100. |
|||
d抵抗电压resistance voltage: 在端子之间端子与壳之间加ac 500v 60hz条件下,持续1分钟测量.无击穿现象出现.in between the terminal and the terminal shell in between ac 500v 60hz conditions, sustained a minute measurement. no breakdown phenomenon. |
|||
5.0可靠性试验reliability test |
|||
a寿命试验life test 以涂有薄层润滑脂的插头(涂润滑脂防止摩擦过热)以每分钟15~20次,无负载插座拨出5,000次,符合规格3.0和4.0规定值.coated with a thin layer of grease plugs (tu grease prevent friction overheated) per minute to 15 ~ 20, a no-load socket allocated 5,000, with the specifications 3.0 and 4.0 provides value |
|||
b温度试验temperature test 将插座放置于40±2℃,相对温度90%~95%环境中,96个小时后取出,取去水滴,将插座放置于常温常湿环境中,于30分钟内测试,符合规格3.0和4.0要求.socket to be placed on the 40 ±2℃, relative humidity of 90% ~ 95% of the environment, 96 hours after the removal, taking a drop of water, will be placed in the socket temperature often wet environment, in the test within 30 minutes, with 3.0 and 4.0 specifications required. |
|||
|
|||
|
|||
|
c耐热试验heat test 将插座放置于70±2℃环境下,96个小时后取出,将插座放置于常温常湿环境中,于30分钟内测定,符合规格3.0和4.0要求.socket to be placed on the 70 ±2℃environment, 96 hours after the removal of sockets placed on the temperature and moisture environment, within 30 minutes measured with 3.0 and 4.0 specifications required. |
d耐寒试验hardy trial |
将插座放置于-40±3℃环境中,96个小时后取出,取去水滴,将插座放置于常温湿环境中.于30分钟内测定,符合规格3.0和4.0要求. socket to be placed on the 40 ±3℃environment, 96 hours after the removal, taking a drop of water, will be placed in the socket regular temperature and humidity environment. within 30 minutes measured with 3.0 and 4.0 specifications required.
|
5.5耐焊接热试验thermal resistance welding test 插座耐焊接热试验中,符合规格3.0和平共处4.0要求. socket welding thermal resistance test, with the specifications required 4.0 3.0 peaceful coexistence. |
a自动焊;温度235±5℃,时间5±1秒.automatic welding; temperature of235℃± 5, ± a time five seconds. |
b人动焊;温度350±10℃,时间3±0.5秒.people to welding; the temperature of 350 ±10℃for 3 ± 0.5 seconds. |
"DC电源插座(SMT)DC-096D"的额定电压为12(V),型号是DC-096D,额定电流为1(A),品牌是HJ,环境温度为耐高温260度(℃),加工定制是否
- DC电源插座(SMT)DC-056加工定制:否
- 3.5插件耳机插座PJ-354品牌:HJ
- 东莞韩晶 排针单排 弯排针 u型排针 90度排针保质品牌:韩晶
- 三档微型拨动开关 8脚贴片 MSK-07D加工定制:是
- 2.0mm间距 双排弯排针排母 双弯插针 双排贴片排针加工定制:是
- FPC卧贴翻盖,连接器FPC品牌:HANJING