产品名称	PPS P-6(粉)美国雪佛龙菲利普粉料
公司名称	东莞市华韵塑胶原料有限公司
价格	53.00/kg
规格参数	PPS(粉):静电喷涂级 P-6(粉):薄膜级美国雪佛龙菲:油漆应用
公司地址	东莞市樟木头镇奥园塑金国际8栋214
联系电话	0769-87600377 13556776933

PPS粉 PPS粉料 PPS粉末塑胶 PPS耐化学 PPS高刚性 PPS阻燃V0 PPS耐高温

（1）一般性能：PPS为一种外观白色、高结晶度、硬而脆的聚合物，纯PPS的相对密度为1.3，但改性后会增大。PPS有吸水率极小，一般只有0.03%左右。

（2）机械性能：纯PPS的机械性能不高，尤其冲击强度比较低。以玻璃纤维增强后会大幅度提高冲击强度，由27J/m增大到76J/m，增大3倍；拉伸强度由6Mpa增大到137Mpa，增大1倍。PPS的刚性很高，在工程塑料中少见。纯PPS的弯曲模量可达3.8Gpa，无机填充改性后可达到12.6Gpa,增大5倍之多。

(3) thermal performance: PPS has excellent thermal performance, short-term can withstand 260 °C, and can be used in 200 ~ 240 °C for a long time; its heat resistance is equivalent to Pi, second only to F4 plastic, which is also rare in thermosetting polymer. (4) Electrical Properties: PPS has outstanding electrical properties, compared with other engineering plastics, its dielectric constant and dielectric loss angle tangent value are relatively low, and in a large range of frequency, temperature and temperature changes little; PPS has good arc resistance; It's as good as thermosetting polymer. PPS is often used in electrical insulation materials, its dosage can account for about 30% . (5) chemical resistance: one of the major characteristics of PPS is its good chemical corrosion resistance, and its chemical stability is second only to that of F4. PPS is stable to most acids, esters, ketones, aldehydes, phenols, aliphatic hydrocarbons, aromatic hydrocarbons, chlorinated hydrocarbons, etc. , not Resistant to chlorinated biphenyls and oxidizing acids, oxidants, concentrated sulfuric acid, concentrated nitric acid, aqua regia, hydrogen peroxide and sodium hypochlorite, etc. . PPS has good radiation resistance. (6) PPS has good flame retardancy, and its oxygen index is higher than 44% . Compared with other plastics, PPS is a high flame retardancy material (47% for pure PVC, 30% for PSF, 29% for PA66,28% for MPPO and 25% for PC) . PPS FORTRON 1131L4 ITT offers COA, COC, rohs. . Msds. . Ul Yellow Card and other information, price concessions, quality assurance!

PPS P-6(粉)美国雪佛龙菲利普粉料

产品详情