非实心插销硬度测试装置
NP-1
Device for testing non-solid pins
NP-1
本装置符合IEC：60884-1-2002图14、GB2099.1-2008图14、VDE0620标准要求，
用于检验插头非牢固插销硬度能否承受足够的压力。
钢棒：Φ4.8mm
负荷重量：100N
Products
Information
Product details:Model NP-1.
The Compliance is checked by the test of clause 24 and, for pins
which are not solid,
by the following test which is made after the test of clause
21.
A force of 100 N is exerted on the pin, which is supported as
shown in IEC60884-1,
figure 14, for 1 min in a direction perpendicular to the axis of
the pin, by means of
a steel rod having a diameter of 4,8 mm, the axis of which is
also perpendicular to
the axis of the pin.
During the application of the force, the reduction of the
dimension of the pin at the
point where the force is applied shall not exceed 0,15 mm.
After removal of the rod, the dimensions of the pin shall not
have changed by more
than 0,06 mm in any direction.