西门子6SL3244-0BB13-1BA1

产品名称	西门子6SL3244-0BB13-1BA1
公司名称	浔之漫智控技术（上海）有限公司-西门子总部
价格	.00/件
规格参数	西门子:驱动器完善:件保内:全新原装
公司地址	上海市松江区广富林路4855弄88号3楼
联系电话	18602118379 18602118379

产品详情

TM31 Terminal Module

With the TM31 Terminal Module, the number of available digital inputs and outputs and the number of analog input and outputs within a drive can be expanded.

The TM31 Terminal Module also features relay outputs with changeover contact and a temperature sensor input.

设计

The following are located on the TM31 Terminal Module:

8 digital inputs
4 bidirectional digital inputs/outputs
2 relay outputs with changeover contact
2 analog inputs
2 analog outputs
1 temperature sensor input for KTY84130, Pt1000 or PTC (Pt1000 can be used from firmware V4.7 HF17 and higher)
2 DRIVECLiQ sockets
1 connection for the electronics power supply via the 24 V DC supply connector
1 PE/protective conductor connection

The status of the TM31 Terminal Module is indicated via a multi-color LED.

The TM31 Terminal Module can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).

The signal cable shield can be attached to the TM31 Terminal Module via a shield connection terminal, e.g. type SK8 supplied by Phoenix Contact or type KLB CO 1 supplied by Weidmüller. The shield connection terminal must not be used as a strain relief mechanism.

集成

The TM31 Terminal Module can communicate via DRIVECLiQ with the following Control Units.

CU3102 Control Unit
CU3202 Control Unit
SINUMERIK Control Unit
SIMOTION D Control Unit
SINAMICS DCM Advanced CUD

Connection example of TM31 Terminal Module

技术规范

	TM31 Terminal Module 6SL3055-0AA00-3AA1
Power requirement, max. At 24 V DC without taking account of the digital outputs and DRIVE-CLiQ supply	0.5 A
Conductor cross-section, max.	2.5 mm2
Fuse protection, max.	20 A
Digital inputs In accordance with IEC 611312 Type 1
Voltage	-3 ... +30 V
Low level (an open digital input is interpreted as "low")	-3 ... +5 V
High level	15 ... 30 V
Current consumption at 24 V DC, typ.	9 mA
Delay times of digital inputs 1), approx.
L → H	50 μs
H → L	100 μs	1.5 mm2
Digital outputs (continuously short-circuit proof)	24 V DC
Load current per digital output, max.	100 mA
Total current of digital outputs, max.	400 mA
Delay times of digital outputs 1)
Typ.	150 μs with 0.5 A resistive load
Max.	500 μs