| 产品名称 | 中国西门子CPU一级代理商|模块代理 |
|---|---|
| 公司名称 | 浔之漫智控技术（上海）有限公司 |
| 价格 | 670.00/件 |
| 规格参数 | 品牌:西门子 型号:代理商 产地:德国 |
| 公司地址 | 上海市松江区广富林路4855弄88号3楼 |
| 联系电话 | 021-54175139 15601915808 |
Memory cards |
SINAMICS SD memory card
The parameter assignment, firmware and licenses for a converter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the converter has been replaced and the data have been downloaded from the memory card the drive system is immediately ready for use again.
The memory card has the following functions:
Parameter settings can be written from the memory card to the converter or saved from the converter to the memory card
The memory card supports series commissioning without the use of a commissioning tool
If firmware is stored on the memory card, the firmware can be upgraded/downgraded during startup
It is used for storing licenses when using functions under license, e.g. the license for enabling the Extended Safety functions
Safe Stop 1 (SS1) 1)
Safe Stop 2 (SS2)
Safe Operating Stop (SOS)
Safely-Limited Speed (SLS)
Safe Speed Monitor (SSM)
Safe Direction (SDI)
Safely-Limited Acceleration (SLA)
Safe Brake Test (SBT) diagnostic function
Notes:
In general, the converter can be operated without a memory card. However, it is necessary if licenses, such as the Extended Safety license, are required. The card must then remain permanently inserted.
Firmware V5.2 or higher is required for the 3 AC series or when using the SINAMICS Startdrive commissioning tool.
1) Safe Stop 1 time controlled (SS1-t) can also be found in the Basic Safety Functions.