Motor type

Permanent-magnet synchronous motor

Permissible operating conditions without derating

Ambient temperature

-15 ... +40 °C (5 ... 104 °F)

Installation altitude, max.

1000 m (3281 ft)

Degree of protection

According to EN 60034-5 (IEC 60034-5, ISO 20653)

IP66, IP67

IP69K (does not apply to the shaft outlet)

Cooling

According to EN 600346

Natural cooling (IC410)

Type of construction

According to EN 600347 (IEC 600347)

IM B5 (IM V1, IM V3)

Shaft extension

According to DIN 7483 (IEC 600721)

Plain shaft
Optional shaft with feather key (half-key balancing)

Shaft and flange accuracy

According to DIN 42955 (IEC 600721)

Tolerance N
In each case for radial eccentricity of the shaft extension, concentricity of the centering edge, and axial eccentricity of the mounting flange to the axis of the shaft extension.

Vibration severity grade

According to EN 6003414 (IEC 6003414)

Grade A
is maintained up to rated speed

Stator winding insulation

According to EN 600341 (IEC 600341)

Thermal class 155 (F)
for a winding overtemperature of ΔT = 100 K

Sound pressure level LpA (1 m), max.

According to ISO 1680

1FS2104

55 dB(A) +3 dB(A) tolerance

1FS2105 and 1FS2106

65 dB(A) +3 dB(A) tolerance

1FS2208

70 dB(A) +3 dB(A) tolerance

Encoder system

AM22DQC (absolute encoder 22-bit + 12-bit multiturn)

Holding brake

Optional integrated holding brake

Connection

One Cable Connection (OCC) for signals and power,
open cable end for direct connection to SINAMICS S210 converter or
cable end with plug connector to connect a MOTION-CONNECT basic line

Surface

Stainless steel 1.4404, roughness < 0.8 μm

Certificates of suitability

cURus, CE, EAC, CEL, EHEDG