| 项目project | khc-3 | khc-3d |
车 体 部 分 | 外形尺寸size | 275(l)×275(w)×260(h) |
重量weight | 10kg |
使用电源input voltage | ac24v（配专用适配器）with special adapter |
功率power | ＜30w |
驱动电机drive motor | dc24v25w 12rpm |
减速器gear reduction | 250:1 |
行走速度travel speed | 10-120cm/min无级调速stepless speed regulation |
磁力方式magnet | 永磁（磁控手柄）permanent magnet |
驱动方式drive mode | 四轮链轮传动 4 wheel-chain-driver motor |
仿行形式imitation in the form of line | 仿行轮沿立板移动imitate the conduct wheel to move along setting up the board |
行走方向direction | 左方向或右方向left /right |
焊接盲区blind spot welding | 275mm(始端start+末端end) |
焊接方式welding methods | 单面角焊single-sided angle welding | 双面角焊double-sided angle welding |
焊枪数量the number of torch | 1 | 2 |
|
调 节 部 分 | 上/下up / down | 30mm |
前/后forward / back | 40mm |
焊接角度welding angle | 45°±30° |
焊枪夹具torch clamp | 手柄拧紧式hinge handle clamping type |
|
控 制 部 分 | 主要功能 main function | 电源开关power 焊接开始/停止按钮start / stop 方向开关direction switch 速度调节travel speed 手动行走manualtype |
|
标准配置 standard configuration | 电源电缆 power cable | 10m( 配专用电源适配器 with special adapter) |
选用配置 optional configuration | 焊枪welding torch | 500a 空冷直管焊枪air-cooled auto welding torch，长度length:4-8m |