来电显示电话,多功能电话大按键电话

品牌	FY	型号	87
录音功能	无	来电显示	有
可视功能	无	号码储存功能	有
触摸屏	无	适用范围	多功能
装箱数	20台

1. phone
2.plug telephone cable
3.a - cable telephone / b - cable line
4.plug the line cord
5. hanger
6. your display lcd
7. speaker
8. set button
9. button memory 1
10. button memory 2
11. button memory 3
12. memory button
13. button up
14. button down
15. dial button
16. button to delete
17. button to check
18. 12-button keypad
19. led
20. flash button
21. redial
22. speaker button
23. pause button
24. volume button
25. handset jack
26. microphone
27. wall mount hole
28. battery compartment
29. wall mount bracket
30. phone holder

1. main function:

* dtmf/fsk two mode incoming mode display (press **# to switch

or 15 seconds’ power off).

*50 groups incoming numbers and time memory (8 digits).

note: if one or two-key memory store number, correspondingly

reduced the groups incoming numbers.

*15 outgoing numbers and talk time memory (8 digits).

*real time date and weekday display, lcd 5 grades selectable.

*1~99 hours no-disturb.

*16 normal rings for selectable.

* ring volume and hand-free volume adjustable by software

setting without switch.

*guard against theft set by software; p/t selectable by software

without switch.

*machine locks, a: lock 0 and 1 b: all (open for 110,112,119,

120) c: do not lock

*flash time 90/95/100/120/180/300/600/1000ms selectable by

software.

*two groups of 32 digits manual ip and one group auto ip.

*3 groups of alarm setting with different sounds.

*auto hook on when forget to hook on (without noise wave

disturb)

*10 groups two-key memory and 3 groups one-key memory..

*local area code 8 digits setting, auto filtrate the local area code

in incoming calls

* required to automatically dial out ip dialing code 0.

2. special keyarrangement:

vol key:

at on hook state, press the key enter to ring volume

select menu, press up or down key to select; at off hook state,

it is hf volume select key;(there are 4 grades ring volumes and

2 hf volumes for select in circle, default is high ); at incoming

check state, it is for vip setting.

mx key:

one-key memory, at on hook state, press the key will

dial out the stored numbers.

memo key:

at on or off hook state, press the key to view the stored

numbers, then press the digit key to dial out the numbers; at pre-dial

state, press the key to input numbers or view the stored numbers,

press the key for 2 seconds enter to store the numbers state, then

press the digit key to choose the store position.

flash/set key:

at on hook state, press the key enter setting

function; at off hook state, press the key does flash function;

auto-rd/back/+0 back key:

at on hook pre-dial state and incoming

or outgoing check state, press the key is auto-rd function; at off hook

state, it is redial the former dialed numbers; press the key for awhile

it will add “0” and do the back call function;

del/no ip key:

at pre-dial state、incoming or outgoing check state and

calculate state, it does the del function; at incoming or outgoing check

state press the key for 2 seconds will delete all the stored numbers;

at off hook before pre-dial, it doesn’t add ex-code and do the auto

ip function.

*、0、# special application:

at setting state and function option state, press * key is same to the

down key and the # key is same to the up key; at on hook state,

press * key for 3 seconds enter to outgoing check state; press # key

for 3 seconds enter to incoming call check state; at check state,

press 0 to change the check mode; at off hook state, it does the digit

function(at pulse dial mode, the first time to press * is to change to

tone dial mode).

3. setting function table

1	1	date setting	5	1	flash time setting
	2	time setting		2	p-t exchange
2	1	ring select		3	guard against theft
	2	vip ring select	6	1	local area code setting
	3	ring volume select		2	ex-code setting
3	1	no1 alarm	7	lcd light adjust
	2	no2 alarm	8	1	auto ip
	3	no3 alarm		2	manual ip1
4	no-disturb time			3	manual ip2

press set key to confirm, del key to the upper menu, and hf key to

exit setting state.

4. function instruction

4.1 menu function setting

at off hook state, press set key to enter the setting state, lcd displays

set 12345678, press the digit key or up/down key to choose the setting

function, and lcd displays the corresponding setting option, after

finish setting, press del key to the upper menu and digit or up/down

to choose the next setting option.(if use the up/down key to the setting

option, you should enter the sub-menu first and then press the up/down

key to choose the setting option, do as follows: press set key and

then press the up/down key. here we just introduce to use the digit

key to choose the setting option). here is the detail step:

4.1.1date/time setting：

press set key and choose 1, lcd displays 1—date、2—cl. choose 1 enter

to datesetting, the digit

will flash, input the digit directly then press set key to confirm; after

finish date setting, lcd will change the weekday automatically. choose 2

enter to time setting, it is the same to the date setting. press hf key to

exit the setting state.

4.1.2ring select and volume adjust：

press set key and choose 2, lcd displays r 1t 2vip 3vol, choose 1 enter to

the normal ring select,lcd displays ring type 01, then press up/down

key to select the ring sound, press set key to confirm, press del key to

the upper menu; choose 2 enter to vip ring select, lcd displays ring vip 01,

the set method is same to the normal ring select; choose 3 enter to ring

volume adjust setting, lcd displays ring vol 04, press up/down key to

select, press hf key to exit.

4.1.3alarm setting：

press set key and choose 3, lcd displays al 1-2-3, choose 1 enter to the first

group alarm setting,lcddisplays alaroff, the off flashes, then input the

alarm time and press set key toconfirm,when to close the alarm, press the

set key and the group of the alarm and then press up/down key to choose

the off; the other two group setting are same to the first one; the first

one alarms only one time,the other two alarm everyday, press any key will

stop alarm during alarming.

4.1.4no-disturb time setting：

press set key and choose 4, lcd displays off_r 00－00, input digit time(00－

99)when flashes, press set key to confirm. when no-disturb function set,

lcd displays the no disturb time and count down to 00-00 then it will auto

exit the no-disturb state. pick up or hand free also can exit the no-disturb

state. it doesn’t ring during the no-disturb state.(vip is allow.)

4.1.5 special function choose setting：

press set key and choose 5, lcd displays 1-f 2-pt 3-d, choose 1 enter to

flash time setting, lcd displays flash 600 and flashes, press up/down key

to choose the time. there are 90，95，100，120，180，300，600，1000ms

for selectable; choose 2 enter to p—t exchange, lcd displays pt tone, press

up/dwon key to choose the dial mode, the init value is tone dial mode;

choose 3 enter guard against theft setting, lcd displays defend off, press

up/down key to choose on/off state.(the passwords are#).

4.1.6local area code and ex-code setting：

press set key and choose 6, lcd displays 1－loc 2-ol,choose1enter to

local area code setting, lcd displays loc。。。。。。, input the digits 1~8

for selectable, then press set key to confirm, press del key to delete

the input numbers, also press set key to confirm. choose 2 enter to

ex-code setting, lcd displays out off, the setting method is same to the

local area code setting. press up/down key to choose off to delete the

ex-code.

4.1.7 lcd light adjust：

press set key and choose 7, lcd displays lcd con 4, press up/down key

to adjust light grade, default is the 4th grade, there are 5 grades for

selectable.

4.1.8ip function setting：

press set key and choose 8, lcd displays 1-au 2-3-ip, choose 1 enter to

auto ip setting, lcd displays au ip off, press up/down key to choose

the ip numbers, ip1, ip2，17909, 17908, 193, 17911, 17921,17931,17951,

17991, 068, 96300, 96333, 196, 190,17969，197，off for selectable,

default is off. (ip1,ip2 are manual ip setting mode); choose 2 enter

manual ip1 setting, lcd displays null, input the numbers directly and

press set key to confirm, lcd displays ip1 code means it is successfully

stored the numbers.choose 3 enter to manual ip2 setting, it is the same

to the manual ip1 setting.

4.2 on hook function operate

4.2.1back dial：

at pre-dial or incoming call check or outgoings check state, press the

back key will dial out the selected numbers; press back key for 3

seconds will add “0” before the dial numbers.

4.2.2incoming call check：

at on hook or off hook state, press up/down key can view the incoming

call information; press # key

for 3 seconds will enter to the incoming call check state fast at on hook

state.

4.2.3outgoing check：

at on hook or off hook state, press checkexchange key enter to

outgoing check state, press up/down key can view the outgoing

information; press * key for 3 seconds will enter to the outgoing

check state fast at on hook state.

4.2.4on hook pre-dial：

at on hook state, input the outgoing numbers, use del key to delete

the wrong dialed number, pick up

or press back key will dial out the numbers when finish inputting the

dial numbers (at hand free

state, it will auto-rd when the line is busy), press back key for 3

seconds will auto add “0” then back all.

4.2.5del function：

at input digit state, use del key to delete the wrong input number;

at incoming call check or outgoing

check state, use del key can delete the information, press del key

for 3 seconds can delete all the information.

4.2.6vip memory：

press up/down key to get the incoming call information, press vol

key will store the numbers to vip or cancel it.

4.2.7one-key memory：

at pre-dial state, input the digits or at check state, get the needed

numbers, then press mx key (xfrom 1~27) for 3 seconds will store the

numbers to the mx memory and lcd displays save means

it is successfully stored; at on hook state, press mx key will dial out

the stored numbers directly(m12~m27 need outside eeprom more

than 24c08).

4.2.8two-key memory：

numbers, then press memo key for 3 seconds, lcd displays save－

and the cursor “－” flashes meantime, input the digit 0~9, 2seconds

later it will return to the main state then it stores successfully; when

to get the number, press the memo key and lcd displays load－,

the “－” flashes, then input the digit 0~9 will get the needed numbers.

4.3 off hook function operate

4.3.2auto_rd：

at hand free state, after dial out and the line is busy, then press

auto-rd key enter auto

redial back state, it will ring back when get through.

4.3.3auto ip：

use setting option 8 to set auto ip numbers，at on hook or off hook

state or back dial state, it will dial auto add ip numbers before the

dial numbers when the first dial number is “0”, if it want to add “0”

to dial back , it also will add the ip numbers first.

4.3.4no ip function：

at auto ip is open state, when pick up press del key before dial out,

it won’t add ip and dial out directly; if set ex-code, press del key

before dial out it also will filtrate the ex-code and dial out directly.