PHC-300A全自动冷热水自吸泵
信息编号:893331 浏览:187次- 供应商
- 温岭市韩程泵业有限公司 商铺
- 认证
- 报价
- 请来电询价
- 品牌
- 韩程
- 型号
- PHC-300A
- 材质
- 铸铁
- 所在地
- 温岭市箬横镇庄联村
- 联系电话
- 0086 576 86825858
- 手机号
- 13705861185
- 联系人
- 江道德 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
品牌 | 韩程 | 型号 | PHC-300A |
材质 | 铸铁 | 驱动方式 | 自动 |
用途 | 自吸泵 | 泵轴位置 | 卧式 |
叶轮结构 | 敞开式叶轮 | 叶轮数目 | 单级 |
叶轮吸入方式 | 单吸式 | 原理 | 自吸泵 |
性能 | 自动 | 扬程 | 35(m) |
转速 | 2860(r/m) | 功率 | 300(w) |
流量 | 34(m3/h) |
温岭韩程泵业有限公司成立于1995年.本厂主要生产韩程phc全自动冷热水自吸泵、非自动冷热水自吸泵、冷热水循环管道泵、热水自动增压泵、全自动家用增压泵等家用水泵,主要用于锅炉、壁挂炉、蒸气发生器、地暖循环设备等。
型号 | phc-300a |
功率(w) | 300 |
电源(v/hz) | 220v,50hz |
转速(r/min) | 2860 |
Zui大流量(i/min) | 34 |
Zui大扬程(m) |
35 |
吸程(m) | 9 |
压力开关(kg/cm2) | 1.5-2.2 |
管径(mm) | 25 |
重量(kg) | 12 |
包箱尺寸(mm) | 300*240*330 |
自吸泵的工作原理:
普通离心泵,若吸入液面在叶轮之下,启动时应预先灌水,很不方便。为了在泵内存 水, 吸入管进口需要装底阀,泵工作时,底阀造成很大的水力损失。所谓自吸泵,就是在启动前不需灌水(安装后第一次启动仍然需灌水),经过短时间运转,靠泵本身的作用,即可以把水吸上来,投入正常工作。自吸泵按作用原理分为以下几类: 1.气液混合式(包括内混式和外混式); 2.水环轮式; 3.射流式(包括液体射流和气体射流)。气液混合式自吸泵的工作过程:由于自吸泵泵体的特殊结构,水泵停转后,泵体内存有一定量的水,泵再次启动后由于叶轮旋转作用,吸入管路的空气和水充分混合,并被排到气水分离室,气水分离室上部的气体溢出,下部的水返回叶轮,重新和吸入管路的剩余空气混合,直到把泵及吸入管内的气体全部排出,完成自吸,并正常抽水。水环轮式自吸泵是将水环轮和水泵叶轮组合在一个壳体内,借助水环轮将气体排出,实现自吸。当泵正常工作后,可通过阀截断水环轮和水泵叶轮的通道,并且放掉水环轮内的液体。射流式自吸泵,由离心泵和射流泵(或喷射器)组合而成,依靠喷射装置,在喷嘴处造成真空实现抽吸。
the working principle of self-suction pump:
normal centrifugal pump impeller if inhaled liquid surface, start in advance, should be inconvenient. in order to water pump suction pipe, memory, import needs bottom valve pump working, bottom valve caused great losses. so-called self-suction pump, is in start without irrigation (before the first start after installation to infuse water), still for a short time after operation, the effect on pump itself, which can be put into water, the normal work. according to the principle of self-suction pump function can be divided into several categories: 1.the gas-liquid hybrid (including mixed type within and outside the mixed type), 2 water wheel, 3 jetting (including liquid jet and the gas jet). gas-liquid hybrid self-suction pump working process: because of the pump suction pump stalled after the special structure, the pump body, being a certain amount of water pump impeller rotation due to start again, inhaled air and water pipe, and is fully mixing gas water separation chamber to water, air separation chamber of the upper spillover of water, gas, and the return of impeller residual air suction pipe, the pump suction pipe and until all the gas discharge, complete, and normal self-suction pump. water wheel self-suction pump water ring round is in a combination of pump impeller and using water loop, wheel, gas discharge self-priming. when the pump is normal work, but through the valve and pump water loop truncate the channel impeller, and put off the liquid water ring round. jetting self-suction pump, the centrifugal pump and jet pump injector (or on), spray nozzle, vacuum suction caused realization.
- 全自动冷热水自吸泵PHC-750A品牌:韩程
- 全自动冷热水自吸泵PHC-1100A品牌:韩程
- 全自动冷热水自吸泵PHC-1102A品牌:韩程
- 全自动冷热水自吸泵PHC-1300A品牌:韩程
- 非自动冷热水自吸泵HC-1100E品牌:韩程
- HC-400E非自动冷热水自吸泵品牌:韩程