品牌 | 维诺 | 连接形式 | 焊接 |
主体材料 | WCB、WC6、WC9 | 公称通径 | 15~400(mm) |
适用介质 | 蒸汽 | 材质 | 碳钢 |
密封形式 | 硬密封型 | 标准 | 国标 |
外形 | 中型 | 流动方向 | 单向 |
驱动方式 | 电动 | 零部件及配件 | 阀体 |
用途 | 截止 | 压力环境 | 高压 |
工作温度 | 高温 | 类型(通道位置) | 直通式 |
型号 | Z960Y |
电动焊接闸阀 电动焊接闸阀执入标准 |
||||||
● 制造与验收技术条件按日本火力发电用阀门标准e101和jb/t3595-93的规定; | ||||||
● 结构长度按e101的规定或按用户提供尺寸 | ||||||
● 焊接坡口接电力工业管理标准78dg的规定或按用户提供尺寸。 | ||||||
● the manufalture and aueptanle specigication shan be based on the japanese standard e101 applied for the thermal powerand jb/t3595-93 | ||||||
● the length shall bein line with e101 or by user’s speeification. | ||||||
● welding groove shan be in auordanle with power industrh spe-cification 78dg or hg user’ specification | ||||||
● the size in inclose is old production’s size 电动焊接闸阀 |
性能规范property and specifiecation | ||||||
产品型号 product type公称压力pn(mpa)nominal pressure | 试验压力(mpa)test pressure | 工作压力(mpa)working pressure | 工作温度(℃)working temperature | 适用介质appicable medium | ||
强度试验sheel test | 密封试验/上密封实验seal test | |||||
z960y-250 | 25 | 37.5 | 27.5 | - | ≤425 | 水、蒸汽、water,steam |
z960y-320 | 32 | 48.0 | 36.0 | - | ≤425 | |
z960y-p54100 | - | 30.0 | 22.0 | p5410 | ≤540 | 蒸汽 steam |
z960y-p54170 | - | 48.0 | 36.0 | p5417 | ≤540 | |
主要零件材料matecrial for main parts | ||||||
零件名称part name | 材料牌号material designation | |||||
阀体body | wcb | wc6 | wc9 | |||
阀板disc | wcb | wc6 | wc9 | |||
阀盖bonnet | 25 | 12cr1mo1va | ||||
阀杆stem | 1cr17ni2 | 20cr1mo1va | ||||
阀座seat | 25 | 12cr1mo1va | ||||
密封环sealing ring | s软钢(增强柔性石墨)s soft steel (flexible graphite) | s软钢s soft steel | f软钢f soft steel | |||
填料packing | 增强柔性石墨fexible graphite | |||||
支架yoke | wcb | wcb或wc6 | ||||
阀杆螺母stem nut | 45(zcuzn25a16fe3mn3) | |||||
四开环four piece ring | 1cr13 | 20cr1mova |
维诺阀门公司订货须知:
一、①
电动焊接闸阀产品名称与型号②电动焊接闸阀口径③电动焊接闸阀是否带附件以便我们的为您正确选型④电动焊接闸阀的使用压力⑤电动焊接闸阀的使用介质的温度。
二、若已经由设计单位选定维诺阀门公司的电动焊接闸阀型号,请按电动焊接闸阀型号直接向我司销售部订购。
三、当使用的场合非常重要或环境比较复杂时,请您尽量提供设计图纸和详细参数,由我们的维诺阀门公司专家为您审核把