免费发布

3.0KW-220V雕刻机电主轴

信息编号:550884 浏览:186次
供应商
泰安海纳轴研科技有限公司 商铺
认证
报价
人民币¥1280.00元每件
品牌
HNZ-30
型号
HNZ-30
主轴锥孔
0.003
所在地
山东省泰安市泰山区上高街道办事处黄家庄村
联系电话
86 0538 8225686
手机号
13954878782
联系人
王建  请说明来自顺企网,优惠更多
让卖家联系我

产品详细介绍

品牌 HNZ-30 型号 HNZ-30
主轴锥孔 0.003 额定转速 0-24000(rpm)
Zui大转速温升 25(℃) 动平衡 0.4(mg)
Zui大转速噪音 70(db) 锥孔振摆 0.005(mm)
适用机床 雕刻机,磨床,铣床,数控 是否库存
是否批发

3000w电主轴规格型号:

主轴型号:gdz-100-3

主轴转速:6000~24000r/min

电机:

额定功率3kw

电压:220v

频率:100~400hz

电流:12a

外型尺寸:

见附图 l1:219 l2:34 l3:36 d1:100 d2:78

轴端连接:er20 带一个夹头

润滑:油脂

轴承:洛阳轴研所7005 2个 7003 1个

重量:8.7 kg

价格:1380.00元(不含税)

structural features

1. a high-speed spindle bearings used in all high-speed angular contact ball bearings, there is no pre-axial load, which can increase the brace stiffness and grinding precision under the high speed rotating.

2. uses precision steel ball retainer to ensure the turning precision of the grinding spindle.

3. spindle can use grease lubrication and oil mist lubrication according to the diferent rotating speed.

4. high spindle temperature causes by the high-speed rotating can be reduced by the coolant circulatory system.

direction for use:

1 grease lubrication (photo 1): before use, please connet to the coolant pipe, and make sure it is in normal cycle.

2.before start the spindle, please rotate the spindle by hand, if not turning smoothly, you should clear the fault and verify the direction of spindle rotation. if the spindle is in the vertical direction, you should make a clockwise turn; otherwise, verify the current connection to make it consistent. cooling fluid for the grinding workpiece can not be let out on the spindle end closure, which will damage the spindle and the bearing. when you stop the spindle, first stop the spindle motor, when the the motor come to the normal temprature, then stop the coollant system.

preventive maintenance

1. the rated voltage,and frequency of the input power of the spindle should be consistent with the technical parameter of the spindle. the roating speed of the spindle can be adjusted by the frequency, and the voltage proportional to the change.

2 if thespindle is temporarily not used, you should use the compressed air way to move out the colling fluid and make the spindle clean, to prevent the water way block and rust.

on the surface of the spindle, you should do mothballing; you should use protector on the shaft end, and add moisture absorption or dry powder, and store the spindle under dry environment

3 bearing replacement should be operated by the professional technicist.

所属分类:中国机械设备网 / 机床主轴
本页链接:http://product.11467.com/info/550884.htm
3.0KW-220V雕刻机电主轴的文档下载: PDF DOC TXT
关于泰安海纳轴研科技有限公司商铺首页 | 更多产品 | 联系方式 | 黄页介绍
主要经营:电主轴
泰安海纳轴研科技有限公司是高科技型高速电主轴专业生产企业,拥有先进的电主轴设计开发和制造能力,设备精良,技术雄厚。目前我厂生产的VAN系列高速电主轴,具有高精度,该钢度、高效率,输出功能大、噪音低等优 ...
我们的其他产品
顺企网 | 公司 | 黄页 | 产品 | 采购 | 资讯 | 免费注册 轻松建站
免责声明:本站信息由企业自行发布,本站完全免费,交易请核实资质,谨防诈骗,如有侵权请联系我们   法律声明  联系顺企网
© 11467.com 顺企网 版权所有
ICP备案: 粤B2-20160116 / 粤ICP备12079258号 / 粤公网安备 44030702000007号 / 互联网药品信息许可证:(粤)—经营性—2023—0112