JEM电机引接线

江苏春晨电缆有限公司生产JEM电机引接线，JEM电机引接线国标产品，JEM电机引接线

5.1 the cable shall be properly packed and delivered on the cable tray meeting the requirements of JB/T 8137.

The cable end should be sealed, the cable ends extend out of the outer protective cover should be protected, its length should be less than 300mm. A short piece of cable with a weight of not more than 80 Kg can be wrapped in loops.

5.2 each circle or each wire should be marked with labels:

Manufacturer name;

Model and specification;

Rated voltage;

Length;

Weight;

Date of manufacture: year;

Product number or certification mark;

The correct rotation direction of the cable tray.

1 scope of application

This standard is applicable to the factory inspection of computer and instrument cable.

2 standard basis

TICW06-2009 computer and instrument cable.

3 inspection items

3.1 the inspection items of computer and instrument cable are shown in table 1.

3.2 finished product cable mark

The surface of the finished cable sheath shall be continuous with the manufacturer's name, product type, specification and rated voltage. The mark shall be legible, easy to identify and scratch, and the mark of the finished cable shall comply with the provisions of GB6995.3.

4 inspection rules

4.1 the number of samples per batch shall be taken at least 1 samples according to the delivery lot, and also stipulated by the supply and demand parties. When the results of the sampling inspection project are not qualified, we should double sampling and carry out second tests on the unqualified project, which is still not qualified. We should test the whole batch of products one by one.

4.2 product appearance should be checked by batch inspection under normal vision.

Table 1

Serial number

project

Corresponding clause

TICW06

Test type

test method

One

structure size

One point one

Insulation thickness

5.2.2

S

GB/T 2951.11

One point two

Stranding pitch

5.3.2, 5.4.5, 5.5.1.2

Normal eyesight and ruler

One point three

Shielding structure

5.4, 5.6

Normal eyesight and micrometer

One point four

Cable forming structure

Five point five

Normal eyesight

One point five

Armoured structure

Five point seven

One point six

Sheath thickness

5.8.2

Two

Conductor resistance (20 C)

5.1.4

R

GB/T 3048.4

Three

Identification

Six point one zero

GB 6995

Four

Delivery length

Eight

Rice meter

Length;

Weight;

Date of manufacture: year;

Product number or certification mark;

The correct rotation direction of the cable tray.