农用车进气管焊接专机|扬帆数控

The torch swing, swing around and residence time can be adjusted, the swing parameters of each layer can be switched automatically, without stopping arc.

其工作方法是通过PLC控制给出数字信号，驱动步进电机来带动滚珠丝杠，Zui终实现焊枪沿焊缝方向左右摆动。

The method is given through the PLC control digital signal to drive the stepper motor to drive the ball screw, finally realize the welding torch along the weld direction about precise swing.

能有效增加焊缝宽度，改善熔池边缘成型，消除“咬边”缺陷，焊缝表面清洁，一次焊接获得多次焊接的效果，大大地提高生产率。

The utility model can effectively increase the width of the weld seam, improve the forming of the weld pool edge, eliminate the defect of the undercut, the surface of the welding seam is clean, and the effect of multiple welding can be obtained by a single welding, thereby greatly improving the productivity.

自动控制系统，采用可编程控制器（PLC）作为主控单元，输出点带中间继电器保护。

Automatic control system, the use of programmable logic controller (PLC) as the main control unit, the output point with intermediate relay protection.

采用触摸屏中英文显示作为参数设置对话界面。触摸屏可设定每层的焊接速度、摆动速度，具有焊枪自动提高功能。

Using the touch screen display in English and Chinese as the parameters of the dialogue interface. The touch screen can be set for each layer of the welding speed, swing speed, improve the function of automatic welding with.

相关产品：农用车排气管焊接专机 , 农用车进气管焊接专机 , 角手架自动焊接专机