光学膜涂布机散热器

 tb850光学膜类涂布复合机

1、涂布方式：多功能涂布，可选配逗号辊涂布、网线辊涂布、微凹辊涂布、挤出涂布、线           棒涂布等。

coatingtype: multifunctional coating, coating type can adopt comma scraper coating,anilox roller coating, micro concave roller coating, extrusion coating or wirebar coating.

2、有效涂布宽度：500-1600mm

effective coating width: 500mm-1600mm

3、机械速度：               5-50m/min(视工艺而定)

mechanicalspeed: 5-50m/min（depends on production technology）

4、放卷直径：                ≤φ850mm（双工位，不停机换卷）

unwindingdiameter: ≤φ850mm（double station，non-stop material changing）

5、收卷直径：                ≤φ850mm（双工位，不停机换卷）

rewindingdiameter: ≤φ850mm（double station，non-stop material changing）

6、加热干燥方式：               离心风机热风循环，加热方式可选电加热、导热油加热、蒸汽加热、热风炉加热等。

heating and drying type: heating cyclingwind by centrifugal blower, heating type can adopt electric hearing, heatconduction oil heating, steam heating or hot-blast stove heating.

7、烘箱长度以及温度控制：烘箱长度15-60m可选，3m一个温区，温度自动控制50-170℃±2℃

ovenlength and temperature control: 15-60m optional oven length, 3m for eachtemperature section, 50-170℃±2℃ automaticcontrolled temperature.

8、卷取边缘整齐：             ±1.0mm

winding edge planeness: ±1.0mm

9、装机总功率：                  约50-200kw（视加热方式而定）

totalpower: about 50-200kw（depends on heating type）

11、外型尺寸：                   39500x2800x5000mm(长x宽x高)27m烘箱

overalldimension: 39500x2800x5000mm（lxwxh）,27m of oven.

性能特点

performancecharacteristics

1.整机为机组框架式结构，机器长度可根据生产需要选择

whole machine adopts unit-frame type structure，machine length can be made according to production requirement

2.涂布方式根据实际工艺要求，可选配逗号辊涂布、网线辊涂布、微凹辊涂布、挤出涂布、线棒涂布等多种计量涂布方式。

coatingtype can adopt comma scraper coating, anilox roller coating, micro concaveroller coating, extrusion coating or wire bar coating, according to actualproduction technology.

3.交流变频无极调速，放卷储料、前牵引、涂布、复合牵引、收卷储料等多点同步控制。

stepless speed regulating by ac inverter, synchronouscontrol of unwinding, pre-traction, coating, laminating traction and rewinding.

4.烘箱部分为分段独立恒温干燥系统，可采用电加热或导热油加热等多种加热方式；每温区自动调控温度

sectional independent homothermal drying system of oven,heating type can adopt electric heating, heat conduction oil heating and so on, automatictemperature control for each temperature section.

5.涂布量自动控制、自动升降速、自动断带检测、自动故障报警、气动元件自动离合等。

automatic coating weight, automatic speed up and down, automaticmaterial breaking inspection, automatic failure warning, automatic separationand reunion of pneumatic component.

6.收放卷采用自动翻转双工位结构配储料装置，可实现不停机换卷。

unwindingand rewinding adopt automatic rotary double stations，non-stop material changing.