NEW990MDb/MDc Milling system

更新时间：2016-05-16 21:01:50 信息编号：4570880 发布者IP：175.22.6.14 浏览：79次

让卖家联系我

new990mdb/mdc milling machine cnc system:

features:

1.adopt modbus technology, arm technology, dsp technology and fpga technology.

2.u disk and rs232 interface,u disk dnc function.

3.network remote technology, online diagnosis system.

4.128m user program space,infinite numbers of programs.

5.absolute motor (multi-turn 17 bit) control technology.

6.max movement speed 300m/min, processing speed 0.01~30m/min.

7.interpolation cycle 2ms, control accuracy 0.1um.

8.grating full closed-loop control technology, processing accuracy≤2um.

9.short line program pre-reading technology, to meet the high speed engraving cutting.

10.intelligent man-machine interface.

function:

function	parameter
control axis	3-axis/4-axis （x、y、z、a）
min set unit	0.001mm
max set value	±99999.999mm
max speed	30m/min
feed speed	0.001~15m/min
manual continuous	one shaft or multiple shafts at the same time
interpolation mode	linear、circular、thread
tool 、tool compensation	length compensation、tool nose radius compensation
spindle function	gear 、dual analog control、rigid tapping
hand wheel function	fixed、external handheld mode
handwheel processing function	program handwheel processing function
screen protection function	have
communication function	rs232、u disk interface
compensation function	tool 、backlash、thread pitch、radius compensation
programming mode	metric/inch system, absolute/relative programming,
limit function	soft limit、hard limit
pre-reading function	pretreatment of short lines 10000 rows
password-protected function	multiple layers of password protection
input and ourput	i/o 24×24
plc programming	user design plc function by themselves
acceleration/deceleration control	linear acceleration and deceleration, exponential acceleration and deceleration
encoder line	any value can be set
user macro program	have
electronic gear function	have

system instructon g code:

code	function
g00	rapid positioning
g01	linear interpolation
g02	cw arc/spiral interpolation
g03	ccw arc/spiral interpolation
g73	high speed deep-hole drilling processing cycle
g81、g82	drill cycle
g83	intermission drill cycle
g85、g86、g89	boring hole cycle
g74、g84	tapping cycle
g22、g800	fixed cycle
g52	set local coordinate
g31、g311	check skip instruction
g15、g16	polar coordinate programming
g20/g21	metric/inch system programming
g90/g91	absolute programming/incremental programming
g17、g18、g19	select plane
g54-g59	work piece coordinate system
g43、g44、g49	tool length compensation
g45-g48	tool radical compensation
g40、g41、g42	tool radical compensation instruction
g60/g64	accurate positioning/continue feed cutting
g26、g261~g264	return to program coordinate
g28、g281~g284	return to reference point
g04	delay instruction
s、m、t	s、m、t function

installation dim.(mm):

application:

milling machine,boring machine,drilling machine,ect.

相关产品：CNC , SYSTEM , Milling , CNC , SYSTEM , CNC , CONTROLLER

所属分类：中国机械设备网 / 其他机床附件
本页链接：http://product.11467.com/info/4570880.htm

NEW990MDb/MDc Milling system的文档下载： PDF DOC TXT

主要经营：CNC system,servo motor, stepper motor,servo driver,stepper driver, inverter, lubrication pump,etc.

taizhounewkyeelectronicsco.,ltd(hereinafternewkyecompany)focusesonthedevelopmentofcncsystem,servomot ...

我们的其他产品