中型一轴横走注塑机械手

 型号：AD II-750+S

      AD II-850+S

      AD II-950+S

说明：

中型一轴横走机械手主要适用于150-350T卧式注射型机的成品取出，采用单截式手臂，可增加副臂用于三片模的料头取出，横行有变频马达（主臂上下为AC伺服马达启动时），AC伺服马达两种驱动方式，引拨、上下气压驱动，其行程调节和位置调整方式有手动调位（标准型）和电动调位，配有标准和抱治具。

Medium 1-axis cross-traveling robot series is mainly applied to take-out of finished product of 150-350T horizontal injection molding machine,it uses single-cut arm,can add jig head for take-out of three-mold material,cross-traveling has two driven ways of inverter motor(main arm up an down is started by AC servo motor)and AC servo the motor,pulling out and traveling up and down are driven by air pressure,its stroke adjustment and postion

adjustment have manual adjustment(standard) and electric adjustment.And is equipped with standard holding fixture.

一般规格

主要规格