80MM ZCUT-80 GL-3000高温胶带保护膜切割机不粘胶切割机TAPE DISPENSER GSC-80

1无滚轮设计，可适应各种不同内径的胶纸。
2切割范围 宽度为80mm以内均可使用 。 
3记忆功能，意外断电后重新开机，可恢复到上次设定切割长度。 
4同一时间可使用两卷胶带  
5保护装置，刀口处加有安全防护挡板。
6数字控制切割长度，可到1MM。
7 可自行适应不同胶质厚度，设有压力微调旋钮调节压力 。

产品规格参数：

 电压：220V.50/60HZ.25W 国标三插头

 切割长度：20mm-999mm

 切割宽度：8mm-80mm

 胶带外径：<Φ300mm

 快切割速度：150/s

 重量：5.5KG

 环境温度:5ºC-40ºC

 环境温度:<80%RH

 外形尺寸：190（W)x140(H)x230(D)mm

 适用胶带种类：粘性胶带和不粘性胶带两种

 粘性：透明胶带.马拉胶.高温胶带.电工胶带.醋酸胶带.美纹胶带.3M双面胶.导电胶带.铜箔铝箔胶带等

 不粘性胶带：保护膜类

-------------------------------

80mm zcut-80 high temperature protective film cutting machine non adhesive cutting machine tape dispenser

1 no roller design, can adapt to a variety of different inner diameter of gummed paper.
2 cutting range width is within 80mm.
3 memory function, restart the machine after unexpected power failure, and the cutting length can be restored to the last setting.
4 two rolls of tape can be used at the same time
5. Protective device, with safety protection baffle at the knife edge.
6 precise digital control of cutting length, accurate to 1 mm.
7. It can adapt to different gel thickness by itself, with pressure fine adjustment knob to adjust the pressure.

Product specifications:

Voltage: 220v.50/60hz.25w national standard three plug

Cutting length: 20mm-999mm

Cutting width: 8mm-80mm

Outer diameter of tape: < Φ 300mm

Fast cutting speed: 150 / S

Weight: 5.5kg

Ambient temperature: 5 ° C-40 ° C

Ambient temperature: < 80% RH

Boundary dimension: 190 (W) X140 (H) x230 (d) mm

Applicable tape types: adhesive tape and non adhesive tape

Viscosity: transparent tape, Marla tape, high temperature tape, electrical tape, acetic acid tape, masking tape, 3M double-sided tape, conductive tape, copper foil aluminum tape, etc.

Non adhesive tape: protective film