1、 注意保存,保存条件不好时,会降低膜片与反射壳(导光板)的粘附力。推荐保存条件为:温度25℃±10℃ 温度65℃±20℃
store with care. storing the units in bad conditions will cause the reflector sheet and decrease it’s adhesive power. storage the products under the conditjon:temperature (25℃±10℃) and humidity(65℃±20℃orh) our recommendation.
2、 焊接温度260℃±5℃,焊接时间小于3秒,烙铁功率小于30w。
the soldering tempwrature is260℃±5℃and soldering time should be less than 3 sec, and soldering iron power should be less than 30w.
3、 焊接点应离产品实体大于1.6mm.
the soldering point should be farther than 1.6mm form body.
4、注意防静电,戴有绳腕带,工作台上要有防静电垫,设备、仪器要可靠接地,电烙铁、锡炉、波峰焊要可靠接地。
本产品的品牌是丰骏,型号是0507,加工定制是是,显示颜色是单色,亮度是超高亮,显示方式是静态显示,像素直径是Ф2(mm),使用环境是半户外,安装方式是支撑式,种类是LED数码管