技术参数: |
1.特 点
中间出线,安装不分左右
2.认 证 公京检第030983号
欧盟ce ater20062620
3.外形尺寸 64*12.8*12.8mm
4.主要材料
4.1 外 壳 abs/磁白色,abs/棕色可选
4.2 连接材质 端子连接
4.3 开 关 日本干簧管
4.4 磁 铁 永磁
5.电气指标
5.1 Zui大开关电压 100vdc,200vdc可选
5.2 Zui大开关电流 0.5a
5.3 Zui大开关功率 10w
5.4 开关初始电阻 ≤200mω,线材加长电阻相应增大
6.输出方式 信号输出
6.1 nc--常闭输出
当磁铁靠近开关,干簧管触点闭合,信号线接通。如门被打开,磁铁离开开关,干簧触点断开,信号线中断,称为-----“断路报警”。
6.2 no--常开输出 可选
6.3 com-常开常闭 转换输出可选
7.包装方式
7.1 内 包 装 10套/pe(15*20mm)
7.2 外 包 装 600套/纸箱(375*295*300mm)
1.
features the middle outlet, install either right or left
2. beijing certified public inspection no. no. 030
983
eu ce ater20062620
3. dimension 64 * 12.8 * 12.8mm
4. main materials
4.1 shell abs /
magnetic white, abs / brown optional
4.2 material terminals connected
4.3 japanese reed switch
4.4 permanent magnet
5. electrical specifications
5.1 maximum
switching voltage 100vdc, 200vdc optional
5.2
maximum switching current 0.5a
5.3
maximum switching power 10w
5.4 switch the initial resistance ≤ 200mω, the
corresponding increase resistance wire extension
6. output signal output
6.1 nc - normally closed output when the magnet near
the switch, reed switch contacts closed, the signal line connected.
if the door is opened, the magnet left switch, reed contact
disconnect, interrupt signal lines, known as -----" circuit alarm.
"
6.2 no - normally open output optional
6.3 com-normally open normally closed output selectable
conversion
7. packing
7.1 in 10 sets of packaging / pe (15 * 20mm)
7.2 external
packaging 600 sets / carton (375 * 295 * 300mm)
|
本产品的工作电压是100VDC(V),品牌是冠川,报警电流是5(mA),发射频率是315~433(MHZ),适用范围是门窗报警,类型是无线门磁,型号是GC-31门磁,发射距离是大于100(m),功率是10,发射芯片是2262,电压是100
所属分类:
中国安防网 /
门磁、窗磁本页链接:http://product.11467.com/info/3927928.htm