sp002e微型控制器使用说明
一、特点:
1、 性能稳定,操作性好,接线简单方便;
2、 支持定制市面上基本所有单线或双线的led驱动ic;
3、 自带76种花样效果,炫丽灵动;
4、 Zui多可带多达2048个像素点;
5、 电源具有防反接功能。
二、按键功能:
mode+ |
向前选择花样效果 |
speed |
循环选择速度 |
mode- |
向后选择花样效果 |
mode+和mode- |
同时按mode+和mode-后同时松开进入自动模式 |
三、参数:
工作电压:5v或12v直流电压输入;
功耗:小于1w。
目前支持ic:ws2801、ws2811、lpd6803、lpd8806、tm1809、ucs1903、ucs9812、apa102、apa104;支持定制其它ic;
注意:上电前请确认供电电压。
四、应用接线图:
ws2811微型控制器
1.接线
该控制器有3条引线,其中红色代表正电源线(vcc),白色(两条:分别为信号地和电源地)代表接地线(gnd),绿色代表品信号线(din)。
微控制器和灯串连接:3条引线分别对应接好,一般为微控制器的红、白、绿与灯串的正、信号、负对应相接。
然后将红色线与外部直流电源的正极相接,将黑色线与外部直流电源的负极相接,即外部直流电源既给微控制器供电又给灯串供电。
2. 操作说明
上电前观察电源是否与控制器的工作电压一致(控制器有5v 和12v两种),确保连接线之间无短路现象。
该微控制器有3个按键。
sp002e micro-controller operating instructions
1. features:
1.works stably, easy to use and connection is simple;
2.can be customized to support almost every kind of one-wire or two-wire led-driver-ic;
3.with 76 kinds of patterns,which are vivid and beautiful;
4.can control up to 2048 pixels;
5.preventing reverse connection of power supply.
2. functions of keys:
mode+ |
switching patterns forwardly |
speed |
switching speed |
mode- |
switching patterns backwardly |
mode+ and mode- |
pressing mode+ and mode- at the same time and release at the same time into auto mode |
3. parameters:
operating voltage:5v or 12v;
power consumption: less than 1w;
supported ic by now:ws2801,ws2811,lpd6803,lpd8806,tm1809,ucs1903,ucs9812,apa102,apa104.can be customized to support other driver-ic.
cautions: please make sure the power supply voltage is match to your controller before you power it.
本产品的建议零售价是¥15.00,品牌是夜彩源,型号是SP002E,额定电压是5-12(V),加工定制是是