supplied ready for use, in durable abs cases, unitors
multi-parameter digi combined oil test kit
contains all of the necessary equipment and consumables for oil
condition monitoring needs.
the digi combined oil test kit from unitor comes complete with
tests for water in oil, total base number (tbn), salt, insolubles
and a viscosity comparison test.
when using easy ship paste
before starting the test: make sure that the inside of the cell is clean and dry (pay particular attention to the seal).
easyship test reagent must be above 18ºc
always start the test with the highest range selected, when in doubt about the approximate amount of water in your test oil. overpressure can occur if an oil sample is tested with a very high water content on the low range 0.02-1% (200-10000ppm). this can cause permanent damage to the pressure sensor.
when using powder reagent
make sure the inside of the cell is clean and dry (pay particular attention to the seal).
always start your test with the highest range, when you are in doubt about the approximate amount of water in your test oil. overpressure can occur if you test an oil sample with a very high water content on the low range 0.02-1% (200-10000ppm). this can cause permanent damage to the pressure sensor.
performance data
range: |
0.02-1%, 200-10000 ppm, 0-10%, 0-20% |
test time: |
2 or 3 minutes depending on reagent |
memory: |
previous test, plus five oils |
battery life: |
five years (10,000 tests) |
本产品的加工定制是否,品牌是unitor,型号是773154,用途是船用滑油燃油检测