自动化光栅
产品阐述 | ||
automation light grid | ||
general specifications | ||
effective detection range | standard : 0.3 ... 6 m option /35: 0.5 ... 8 m |
|
threshold detection range | standard : 7.5 m option /35: 10 m |
|
light source | ired | |
light type | modulated infrared light , 850 nm | |
field height | see table 1, max. 3000 mm | |
beam spacing | 100 mm | |
number of beams | see table 1, max. 31 | |
angle of divergence | 10 ° | |
functional safety related parameters | ||
mttfd | 78 a | |
mission time (tm) | 20 a | |
diagnostic coverage (dc) | 60 % | |
indicators/operating means | ||
function display | emitter: yellow led, illuminates at high emitting power, off at
low emitting power receiver: yellow led: illuminates when an object is detected flashes when falling short of the stability control (4 hz) error message: yellow led flashes (8 hz) in emitter and receiver |
|
controls | receiver: 2 pushbuttons for programming | |
electrical specifications | ||
operating voltage | 18 ... 30 v dc | |
interface | ||
interface type | io-link | |
protocol | io link v1.0 | |
output | ||
switching type | factory setting: dark on , switchable to light on mode | |
signal output | switch output (detection field c/q) 1 push-pull output,
short-circuit protected, reverse polarity protected on pin 4
(receiver), height monitoring (h1, h2. h3) 3 push-pull outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver) |
|
compliance with standards and directives | ||
directive conformity | emc directive 2004/108/ec | |
standard conformity | ||
product standard | en 60947-5-2:2007 iec 60947-5-2:2007 |
|
mechanical specifications | ||
protection degree | ip67 | |
connection | emitter: 200 mm connecting cable with 4-pin, m12x1
connector receiver: 200 mm connecting cable with 8-pin, m12 x 1 connector cable cross section min. 0.25 mm2 max. cable length 30 m |
本产品的加工定制是否,品牌是P+F/倍加福,型号是LGS100Serie,类型是光栅电子尺,测量范围是0.3...6m,精度是100mm,解析度是光栅LGS100,重量是光栅LGS100(kg),尺寸是光栅LGS100(mm)