可以用水清洗的脱模剂FK-67【美国原装进口】

pva脱模剂fk-67【美国原装进口】

fk-67是一种效用独特的新型脱模剂。喷涂于模具表面之后，可以形成一层可溶于水但不溶于溶剂的干膜层，在树脂完全固化之后，frp制品可以很轻易地从模具中脱出，并且膜层可以很方便地手工撕除，或用水清洗干净，模具清理效率高，成本低，对模具无损伤。特别适用于聚酯、乙烯基、环氧树脂基体frp制品与各种模具表面的脱模。

简要使用步骤：

重要提示：一定要等Zui终喷涂膜层完全干燥之后，才可以在其上进行胶衣喷涂或者树脂浇注操作。

可选择颜色：绿色，紫色

blend of resins and plasticizers that give a spray film its elasticity and complete coverage unequaled in the industry. consecutive coats create desired soft tone or dullness.

pva application:
set spray pressure not to exceed 25 psi.
spray a fog coat and allow film to dry to firm tack.
cross-spray to get the complete coverage and allow film to dry to firm tack.
spray a flow coat of 4 mil thickness.

note: make sure final coat is completely dry prior to spraying gel coat or casting.