新品供应气动压接机 FEK-60EM气动式端子压接机 导线压接机

em-6b2是用于非焊接电气接线的压接，具有省力、快捷等优点，是替代手动压接钳的选择，适用截面范围在0.25mm2至10mm2之间的冷压端头及剪切端子功能。随机配备7套精密的压线模，可随时根据需要更换压线模具，工作效率高、适应性强。
本产品采用定速马达驱动，无论是在压接力量上或压接速度上都具有高效率与高品质的优点，适用于中大数量端子压接使用，如果所需压接端子形式多样的话，更需选择本产品。
本产品通过ce认证，已申请外观专利。
type em-6b2 is an ideal crimper for connection in cabinet.it is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and cu/al cutting in 7mm. it is supplied with seven kinds of accurate and replaceable die sets. the crimper has high working efficiency and wide application.
the crimper is driven by fixed speed motor so that it owns advantages of high efficiency and high not only in crimping force but crimping speed. it is good for terminal crimping in large or medium if there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.
本产品采用双作用标准气缸驱动，在压接力和压接速度上具有高效率与高品质的优点。极适用于中、大数量之端子压接使用。如果所需压接端子形式多样，更应选择本产品！am-10与本公司所生产的手工压接钳的夹具有着良好的互换性。且备有多种样式的端子压接夹具可供选购。
随机附件：口模1副，脚踏气阀1只，气管2条
the machine is driven by dual-action normal cylinder, which has advantages of high efficiency and in crimping force and speed. the machine is fit for crimping many kinds of terminals. the die sets are interchangeable with our manual crimping tools. so we can provide you all kinds of die sets for crimping.
accessories: one die set, one foot air valve, two air pipes.
em-6b2
0.25-10
ac 220/110
12.7
325×265×150
12
型号
压接能力
电压范围
出力
外形尺寸
重量
item no.
capacity (mm2)
voltage range (v)
output (kn)
overall dimension (mm)
weight (kg)
am-10
0.08-10
0.4-1.0
13.5
260×120×140
4
型号
压接能力
气压范围
出力
外形尺寸
重量
item no.
capacity (mm2)
air pressure range (mpa)
output (kn)
overall dimension (mm)
weight (kg)