零售： 晶研新款电容表M6013

jingyan/晶研m6013  v2.0自动量程电容表，具有测试速度快，高精度可达1％，大量程测试 0.01pf到470mf(470mf＝470000uf)电容，使用128x64点阵lcd液晶显示屏幕，可显示5位读数，适合足够专业工程师，diy用户使用。

avg滑动平均功能，能够在测试稳定后自动启动，可以让用户更加准确读取数值；自动量程和手动量程任意切换；一键清零按钮，方便更加稳定准确测试，减少误差；自动关机功能，节省电量。

★注意：测试电容之前一定要对电容进行放电，否则有可能损坏仪器！

测试量程	精度(清零后,测试1nf， 1uf， 1000uf)	响应时间(手动模式) 自动量程响应时间为0-2秒，同时也取决于测量的电容数值 大电容需要更多的响应时间
0.01pf到47.000nf	1%+2位数	~0.2秒到1秒
47.00nf到47.000uf	1%+1位数	~0.2秒到2秒
47.00uf到470.00mf	1 to 3%+1位数(较大的电容将有较大的误差)	~0.2秒到30秒
测试电压		小于0.8v
钳位电压		大约1.25v（开路电压）
工作电流		0.02a
电池供电		两节 aa 1.5v电池 续航大于80h
外部电源		5v微型usb（micro usb）

*精度也可能受到测试线的长度和测试线之间距离影响，特别是pf级别的电容。建议使用尽可能短的测试线，还要注意周围的电磁干扰（emi）和无线电频率（rf）噪声，这些都会影响pf级别的电容测试。

发货清单：

标配：
m6013电容表x1台

测试线x1对

 

--------------------------------------------------

features:

jingyan m6013 v2 auto-ranging capacitance meter.

using 128x64 dot matrix lcd, can display 5 digit reading, large range of measuring 0.01pf to 470mf (470000uf) capacitance, which enough for diy user to professional engineer usage.

m6013 have fast reading speed and high accuracy up to 1%.

reading a 2200uf only take ~0.2s

*please discharge the capacitor before testing

compare m6013oldv1 andnewv2improvement:

1)larger measuring range, v2 can read up to 470mf

2)new large dot matrix lcd

3)more stable on reading, (with auto running averaging function, can read pf more stable and accuracy)

4)new housing with stand

5)can use 2x aa battery rather than 9v

6)can use mirco usb as external power.

specification:

range	accuracy (after zero, tested with 1nf, 1uf, 1000uf)	refresh time (manual mode) *auto mode take 0 to 2s more time depend on value larger capacitance take more measuring time
0.01pf to 47.000nf	1%+2digit	~0.2s to 1s
47.00nf to 47.000uf	1%+1digit	~0.2s to 2s
47.00uf to 470.00mf	1 to 3%+1digit (larger capacitance will have larger error)	~0.2s to 30s

 

*accuracy maybe affected by the test lead’s length and distance of test leads. especially testing pf small capacitance, shortest test lead is recommended, and be careful the surrounding emi or rf noise may affect the pf reading.

1)accuracy: up to 1% (detail on above table)

2)high resolution: 5 digit

3)measuring voltage: <0.8v

4)clamping voltage: ~1.25v(open voltage)

5)battery 2x aa 1.5v battery

6)external power: 5v micro usb

7)operating current 0.02a

8)battery life time: >80 hours

 

operating introduction:

1)power on

press and hold the on/ off circle orange button for 1 to 2 second to power on.

press and release the on/ off button to shut downmeter.

2) auto/ manual mode:

i) auto range:

press and release the range button and at the first line of lcd will show “auto:"

at auto mode meter will automatically select the best range to detect.

ii) manual range:

scroll the manual range from 47nf, 47uf and 470mf range by press and release the range button

in lcd will show manual at first lcd line and show at second line: 0-47nf, 47nf to 47uf and 47uf to 470mf.

3) 1 key zero:

open circuit the test leads’ terminal.

press and release the “zero" button, lcd shows “zero" and wait the zero disappear.

if you are using the meter array socket, you need to open circuit to set zero too.

4) socket:

you can use the 8 pin socket to measure the capacitor

5) running average:

it will automatically start running average if the capacitance reading become stable and user can get more accuracy reading.

during running average it will show “avg” at right bottom lcd or it will show raw data icon “raw”

as a result, if you want to get higher accuracy reading, you can take the reading during avg display.

this function will automatically on, once the raw data is noise.

6) backlight:

lcd backlight will on during power on

7) auto sleep:

around 8 to 10 hours for not testing, it will shut down automatically to save power.

8) overflow or ol:

display overflow when the value is out of range, you can check that you are zero correctly.

9)plastic stand:

if you don’t use the stand, press and push the lock position:

package content

1 unit m6013

1 pair test probe

本产品的加工定制是是，类型是电容表，品牌是晶研，型号是M6013