省钱 省时 2014新款 一次性 双面 印花 热转印设备

mt-6500 lanyard printing machine technical parameters

电压voltage:380v.

功率gross: 9kw

温度范围temperature range: 0-399℃

时间范围time range: 0-999sec.

工作台尺寸worktable size: 60x400cm    

滚筒速度rotation speed :1.-3.5 meter／minute

包装尺寸package size: 60x90x135cm

重量weight :400kg

1温度性能

temperature control performance

   mt -6500型织带印花机恒温采用Zui先进控制系统、控制方式:采用微电脑pid模糊运算控制方式,可根椐外部的环境及，设备的类型来自动设置其内部参数,使其达到值。控制精度:可达正负0.2度，时间全数字化显示，恒温效果好，使用寿命:设计使用寿命为10年。

mt -6500 lanyard printing machine adopt the most advanced temperature control system which is fuzzy operated by microprocessor pid so that it can be automatically set internal parameters based on external environment and the type of device to get best performance. high precision (±0.5 ℃); digital display of time, constant temperature, performance life: desired to 10 years.

特点：周边发热，升温快。油衡温，连续转印无色差

features: around heating, heating up fast, steady oil temperature, continuous printing without chromatic aberration.

2变频器性能、特征：

converter performance and features

mt -6500型织带印花机采用先进的控制方式实现了高转矩、高精度、宽调速驱动，能够满足各种织带，松紧带，缎带，雪丝带等要求的印花数度。通过空间电压矢量pwm控制和无速度传感器矢量控制技术及电磁兼容性整体设计，满足客户对适用场所的大转矩低噪音、低电磁干扰的环保要求。

mt -6500 lanyard printing machine adopt the advanced control system to achieve high torque, high precision and wide-speed drive, will meet the printing speed re of a variety of lanyard, elastic band, ribbon, snow ribbon and so on. it is control through space voltage vector pwm, speed sensor less vector control and the overall design of electromagnetic compatibility to meet environmental re of high torque with low noise and low electromagnetic interferences.

1.采用空间电压矢量pwm控制和无速度传感器矢量控制;

space voltage vector pwm and speed sensor less vector control

2. 1hz时150%额定转矩；;

1hz, 15% rated torque

3.功能完善、体积小巧，适合各种现场配套使用；

functional integrity, compact, suitable for supporting all occasions.

4.具有自动稳压（avr）和自动限流功能，系统更加稳定；

more stable with acr and automatic current limit function

5.内置pid控制器，可实现恒压“一拖多台”控制（选配功能)

multi-split with constant voltage achieved by built-in pid controller (optional )

6.多达16段速控制及简便易用的纺织摆频功能让应用更加得心应手；

up to 16 multi-speed control and user-friendly textile wobble frequency make it with high proficiency.

7. 0~20khz的脉冲输入输出接口，方便组成数字化的闭环控制系统；

pulse input & output interface of 0-20khz is convenient to form digital closed-loop control system

8.可内置rs485通讯接口，轻松实现集中控制和主从连动控制。

   it can be set a build-in rs485 communication interface to achieve centralized control and master-slave coordinated control.

性能特征：运作稳定，产品印出来不会有模糊不清，能满足客户的各各要求从而大大的降低啦客户的成本。

features: stable operation, clear print, greatly reduce the cost of customer.

3定位系统

position system：

1）材料定位系统

mt -6500型织带印花机采用垂直三重定位，对位准，整卷，多条同时转印速度快，效益高！【适用于：各种手机挂带，鞋带，腰带，松紧带，，雪丝带，商标等产品的转印】

material positioning system:

mt-6500lanyardprinting machine adopts triple vertical positioning system. accurate positioning, entire roll, high speed of more than one rolls printing simultaneously, high profits.

( suitable for printing all kinds of mobile lanyard, shoelace, belt , elastic, snow ribbon and label )

2）转印纸定位系统

mt -6500型织带印花机采用气胀轴加胀力调节器特点：

轴主体采用优质钢管，表面镀铬，铝制凸键伸缩灵活；配置优质橡胶内胆与快速充排气气嘴，密封效果好，使用寿命长，可拆卸轴头，维修方便。充气后单边膨胀高度可达5mm至6mm，比如膨胀前直径为74mm至75mm，膨胀后直径可达79mm至82mm，特殊膨胀高度，另行要求。3英寸键式气胀轴，通常使用卷管内径76mm。可满足客户印刷面积不受限制收放卷轴、能有效提高工效。

特征：在印刷过程中印花纸才不会左右偏移，原始的要几个人操作有啦以上2个定位系统现在只需要1个人就可以操作啦。印刷速度也有所提高.

  transfer printing paper positioning system:

mt -6500 lanyard printing machine adopts air shafts increasing expansion force conditioner.

main body of axis is made by high steel tube, coated by chrome on surface. scalable and flexible aluminum cam key; high- rubber internal bladder; quick charge and exhaust gas nipple; good sealing effect; long serviceable life; dismountable axle housing convenient to repair. the expansion height of single side could be 5mm-6mm after being inflatable. for example, if its diameter was 74mm-75mm, after be inflatable it would be 79mm-82mm. special expansion height should be required separately. 3-inch button style air shafts; 76mm usually inside diameter; it can meet the different re of printing area, and highly improve efficiency.

features: printing paper will not shift around in printing process. old model machine needs several workers to operate, but our machine needs only one worker with two positioning system mentioned above. printing speed has been improved also.

4        毛毯校正系统

blanket correction system:

mt -6500毯带脱离式,毛毯采用同步调节，并且带有压力平衡杆，确保每次毛毯和加热筒压力一致，彻底解决啦在关机或停电时毛毯降温的问题，更好的保护毛毯带。

mt -6500 separation formula blanket, blankets adopt synchronous adjustment system and pressure balance bar to ensure that the blankets got the same pressure as the heating roller. this technique which provide better protection of blankets completely solved the cooling problem of blankets when the machine shut down or power failure happened.

 东莞华锦实业有限公司位于中国的制造业之都------东莞市厚街区，是一家从事热转印Zui早、经验丰富、技术Zui先进、信誉的，集研发、生产、销售为一体的专业性热转印机械生产厂商。企业荣获了政府授予的“广东省商标”、“民营科技企业”、“员工满意企业”、“重合同守信用企业”等一系列荣誉。公司先后通过了“国际质量iso9001”，“国际环境iso14001”等管理体系认证和欧盟品质体系“ce”认证，并拥有多项技术专利，科技成果和技术指标均居于业内领先水平。

  多年以来，为了更好的完善公司体系、满足客户的需求、公司分别设立织带印花 加工、印花技术培训、印花机械设备等研发中心。可根据每位客户的使用要求，提供Zui专业的印花计划方案及全套生产工艺，以满足每位客户的需求。几年来经过全体员工不懈的努力，华锦已经成为织带印花行业内专业的制造厂商之一。设备广泛应用于产品适合于服装、手袋、雨伞、鞋、帽、工艺品、广告用品、织带等领域。

   公司拥有1000多平方米的现代化自置厂房，强大的技术力量及先进的加工设备，使公司拥有了加工制造能力，确保按时保质向客户交付设备。

   我们始终坚持“以品质为资本，以不断学习创新为生命力，以顾客满意为宗旨”

的经营理念。将会以更高的质量，更完善的售前和售后服务来回馈客户对我们长期的支持与信任，我们诚邀客户亲临华锦。