主营顺络电感SWPA8040S2R2NT 8*8*4 2.2UH 原装
信息编号:2900755 浏览:57次- 供应商
- 深圳市升腾伟科技有限公司 商铺
- 认证
- 报价
- 请来电询价
- 应用范围
- 种类
- 电流互感器
- 品牌
- Sunlord/顺络
- 所在地
- 深圳市福田区华强路电子世界2号2楼21C143房
- 联系电话
- 15018504688
- 联系人
- 詹嘉莉 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
electrical characteristics
please refer to item 12.
1) operating and storage temperature range (individual chip without packing): -40 ~ + ℃ 125℃(including self-heating)
2) storage temperature range (packaging conditions): -10 ~+40 and rh 70% (max.) ℃ ℃
4 test and measurement procedures
4.1 test conditions
4.1.1 unless otherwise specified, the standard atmospheric conditions for measurement/test as:
a. ambient temperature: 20±15℃
b. relative humidity: 65±20%
c. air pressure: 86kpa to 106kpa
4.1.2 if any doubt on the results, measurements/tests should be made within the following limits:
a. ambient temperature: 20±2℃
b. relative humidity: 65±5%
c. air pressure: 86kpa to 106kpa
4.2 visual examination
inspection e: visual.
4.3 electrical test
4.3.1 inductance (l)
a. refer to item 12.test e: wk3260blcr meter or e
b. test frequency and voltage: refers to item 12.
4.3.2 direct current resistance (dcr)
a. refer to item 12.
b. test e: hioki 3540 or e
4.3.3 saturation current (isat)
a. refer to item 12.
b. test e: wk3260b lcr meter or e
c. definition of saturation current (isat): dc current at which the inductance drops approximate 30% from its value without
current.
4.3.4 temperature rise current (irms)
a. refer to item 12.
b. test e (see fig. 4.3.4-1, fig. 4.3.4-2): electric power, electric current meter, thermometer.
c. measurement method
1. set test current to be 0 ma.
2. measure initial temperature of choke surface.
3. gradually increase current and measure choke temperature for corresponding current.
4. definition of temperature rise current: dc current that causes the temperature rise ( t △ =40°c) from 20°c ambient
please refer to item 12.
1) operating and storage temperature range (individual chip without packing): -40 ~ + ℃ 125℃(including self-heating)
2) storage temperature range (packaging conditions): -10 ~+40 and rh 70% (max.) ℃ ℃
4 test and measurement procedures
4.1 test conditions
4.1.1 unless otherwise specified, the standard atmospheric conditions for measurement/test as:
a. ambient temperature: 20±15℃
b. relative humidity: 65±20%
c. air pressure: 86kpa to 106kpa
4.1.2 if any doubt on the results, measurements/tests should be made within the following limits:
a. ambient temperature: 20±2℃
b. relative humidity: 65±5%
c. air pressure: 86kpa to 106kpa
4.2 visual examination
inspection e: visual.
4.3 electrical test
4.3.1 inductance (l)
a. refer to item 12.test e: wk3260blcr meter or e
b. test frequency and voltage: refers to item 12.
4.3.2 direct current resistance (dcr)
a. refer to item 12.
b. test e: hioki 3540 or e
4.3.3 saturation current (isat)
a. refer to item 12.
b. test e: wk3260b lcr meter or e
c. definition of saturation current (isat): dc current at which the inductance drops approximate 30% from its value without
current.
4.3.4 temperature rise current (irms)
a. refer to item 12.
b. test e (see fig. 4.3.4-1, fig. 4.3.4-2): electric power, electric current meter, thermometer.
c. measurement method
1. set test current to be 0 ma.
2. measure initial temperature of choke surface.
3. gradually increase current and measure choke temperature for corresponding current.
4. definition of temperature rise current: dc current that causes the temperature rise ( t △ =40°c) from 20°c ambient
本产品的应用范围是陷波,种类是电流互感器,品牌是Sunlord/顺络,型号是SWPA8040S2R2NT,封装形式是贴片电感,绕线形式是单层密绕式,导磁体性质是铁芯,磁芯形状是工字形,安装方式是卧式密封,电感量是2.2UH