1.接收制式:
receiving system: dvb-t,dvb-t2
2.工作条件
operation conditions
no. |
parameter |
min. |
typ. |
max. |
remark |
1 |
supply voltage (v) |
3.2 |
3.3 |
3.4 |
ripple≦50mv |
2 |
supply current (ma) |
200 |
|||
3 |
ambient temperature (°c) |
0 |
60 |
||
4 |
relative humidity (%) |
80 |
3.测试条件
standard test conditions
no. |
parameter |
min. |
typ. |
max. |
remarks |
1 |
ambient temperature (°c) |
23 |
25 |
27 |
|
2 |
relative humidity (%) |
50 |
60 |
70 |
|
3 |
supply voltage (v) |
3.2 |
3.3 |
3.4 |
|
4 |
rf input termination (?) |
75 |
4. esd protection specification
tuner will be packed with anti - static poly foam to prevent the esd damage. do not touch the tuner pins before grounding yourself. anyone handling the tuner must wear a properly grounded anti - static discharge bracelet.
4-1. rf connector
test is performed with a voltage discharge from a 150pf capacitor over a 330?series resistance in the discharge path. there is a direct contact between the test probe head and the rf connector with ± 8 kvdc.
4-2. module pins
test is performed with a voltage discharge from a 150pf capacitor over a 330?series resistance in the discharge path. there is a direct contact between the test probe head and pin 1 through 11 with 3 successive esd discharges of ± 2 kvdc.
5.电气特性
electrical specification
5-1general characteristics
parameter |
min |
typ |
max |
unit |
rf frequency
input return loss
rf input impedance
voitage gain
tuneragg gain range
tuner noise figure
output 1db compression
3rd-order in-band intermod intercept(gain=50 db)
phase noise 1khz 10 khz 100 khz
channel switching time
|
44
-
-
91
105
-
-
-31
- - -
-
|
-
8
75
94
115
6.5
110
-26
- - -
-
|
1002
-
-
-
-
-
114
-
-80 -90 -105
50
|
mhz
db
ohm
db
db
db
dbuv
dbm
dbc/hz dbc/hz dbc/hz
ms
|
5-2 loop-through characteristics
parameter |
min |
typ |
max |
unit |
loop-through rf frequency
input return loss
loop-through gain variation
loop-through noise figure
|
44
-
-1
- |
-
6
-
7.5 |
885
-
3
- |
mhz
db
db
db
|
module pin define
pin |
function |
description |
1. |
ant power |
power supply for active antenna |
2. |
nc |
nc |
3. |
vcc1 |
+3.3 volt nominal |
4. |
sda |
i2c bus data |
5. |
scl |
i2c bus clock |
6. |
nc |
nc |
7. |
if_agc |
if agc input |
8. |
if_n |
digital if output 1 |
9. |
if_p |
digital if output 2 |
机械结构图
本产品的加工定制是是,品牌是CDT,型号是CDT-902T315-20,种类是调谐器