JQ-1318超强激光切割机，激光机

qsdie board laser cutting machine with ballscrews(qs-1318)

l         model: qs-1318 die board laser cutting machine

l         working area: 180cm * 130cm (l*w)

l         machine dimension:  230cm*185cm*135cm( l*w*h)

l         laser tube: 200w ( famous gsi brand, made in uk)

l         driving system: 3-phase steppermotor

l         driven system: both x-axis and y-axis are all ballscrews.

l         cutting speed: 0-200mm/s

l         repeating location: ≤±0.01

l         supported graphic format: plt, ai, dst, dxf

l         supported software: coreldraw, autocad, lasercut

l         communication connection: usb, pci ( optional)

l         working voltage: 220v/60hz, 110v/50hz

l         working table: knife worktable ( most suitable for hard material)

excelent gsi 200w laser with unparalleled beam quality, efficiency

and longevit

l         the maximum output power is 220w-240w at 10.6μm tem。。

l         excellent beam proile at all power levels

l         high stability laser output

l         typical lifetimes in excess of 10,000 hours

l         proven difusion cooled designs

l         sealed units needing no gas supply

l         long life high vacuum technology

l         unique beam proiles available from dual-tube beam combining technology

l         available as laser tube only or fully cased systems

l

high effciency and multifunctionalwater chiller.

1.    used high-voltage electrostatic spray processing with a character of elegant chic and durability .

2.    adapt imported high-quality stainless steel cold-water circulating pump with large flow, high lift, low noise, long life; stainless steel water tanks and piping as well as stainless steel and brass valves will never have the risk of rusty.

3.    the control precision is ± 0.1℃; it has fault-wide automatic diagnosis function which show the points of failure appear directly on the screen, prompts the user to quickly remove the faults. failure phenomenon could be transmitted directly through the data line to the machine tool numerical control system，avoiding the damage of machine and processing of scrap pieces.

"现货供应JQ-1318超强激光切割机，激光机"的品牌为金强激光，型号是JQ-1318，控制方式为数控，作用对象是非金属，电流为交流，用途是切割，产品别名为镭射雕刻机，Zui大线割速度是400（mm/s），适用材质为压克力、密度板、等非金属，Zui大刻线深度是30（mm），定位精度为0.01（mm），动力形式是激光