3D打印机耗材试用装30-40克,颜色随机!
信息编号:2625582 浏览:189次- 供应商
- 张家港市南丰高富机械厂 商铺
- 认证
- 报价
- 人民币¥4.00元每件
- 截面形状
- 圆形
- 用途
- 3d打印机
- 材质
- abs
- 所在地
- 南丰镇东港村七组5号(经营场所)
- 联系电话
- 86 0512 13962286301
- 联系人
- 曹小燕 请说明来自顺企网,优惠更多
- 让卖家联系我
产品详细介绍
abs试用装大量上柜,颜色随机,1.75mm谢谢!
基本参数:
abs建议挤出温度:230 ℃ pla建议挤出温度:190 ℃
abs 3.0mm每公斤长约150米 1.75mm每公斤长约275米
pla 3.0mm每公斤长约125米 1.75mm每公斤长约230米
每盘材料重1kg (带包装和卷盘重1.35kg)
包装方式:外纸盒内密封塑料加吸潮剂
直径3.0/1.75mm,误差+/-0.05mm
广泛适用于市面上绝大多数进口国产机型
1,我们选用优质生物塑料pla和工程塑料abs,pla是从淀粉中提炼的新型塑料,在自然环境中可以分解;abs具有较高抗冲击和延生性。这两款塑料是我们3d打印的理想原材料。
1.we will use high- bio plastics and engineering plastics such as abs pla, pla is a new type of plastic made from starch, in the natural environment can be decomposed; abs has higher anti impact and the extension of nature. the two section is the ideal raw material of 3d plastic we print.
1.we will use high- bio plastics and engineering plastics such as abs pla, pla is a new type of plastic made from starch, in the natural environment can be decomposed; abs has higher anti impact and the extension of nature. the two section is the ideal raw material of 3d plastic we print.
2,pla的熔点190-230℃,abs的熔点170-240℃。
2. pla process temperature is 190-230℃, abs is 170-240 ℃
3,pla、abs易成型,打印产品没有毛边,颜色逼真鲜艳,整个生产过程无异味。
3.pla and abs can be easily shaped when printing , products has no raw
2. pla process temperature is 190-230℃, abs is 170-240 ℃
3,pla、abs易成型,打印产品没有毛边,颜色逼真鲜艳,整个生产过程无异味。
3.pla and abs can be easily shaped when printing , products has no raw
edge , bright color . there is no peculiar smell when producing .
4,产品规格有φ1.75mm和φ3mm,精度控制在正负0.05mm。生产过程中采用镭射激光测径仪器和plc控制产品直径和圆度。
4.we produce diameter of 3.0/1.75mm for reprap 3d printer , dimensional
4,产品规格有φ1.75mm和φ3mm,精度控制在正负0.05mm。生产过程中采用镭射激光测径仪器和plc控制产品直径和圆度。
4.we produce diameter of 3.0/1.75mm for reprap 3d printer , dimensional
accuracy ±0.05mm with laser monitor and interlock device
5,产品生产完工后进烤箱烘干后真空包装。
products will be moved in oven , then vacuum packaging and shipment
5,产品生产完工后进烤箱烘干后真空包装。
products will be moved in oven , then vacuum packaging and shipment
of products .
注:pla材料比abs贵8元/每盘!
"3D打印机耗材试用装30-40克,颜色随机!"的外观为小卷,密度是1.05(g/cm3),长度为5-8米(m),用途是3D打印机,截面形状为圆形,材质是ABS