原装德国进口GESIPA TAUREX 1气动拉钉枪、优势

modular design for the complete tool series : - high level of common parts for low spare parts inventory and easy maintenancejaw assembly (patent pending) with jaws guided in independant channels and pneumatic contact pressure : - long life duration - safe and secure gripping of the mandrels - one single jaw assembly for all rivet dimensionsperformance : - high setting force and low tool weight - faster working cycles - stroke optimized for every tool typeeconomy :low compressed air consumption through - same air for rivet setting and broken mandrel ejection - switchable suction system through easy to activate slide switchergonomics and safety : - rubber padded, hand friendly tool grip - outstanding weight distribution - low vibration and noise damping - low triggering force - mandrel container e with safety device and adjustable airflow deflection - safety air pressure valve to avoid tool overstress through excessive air pressure

taurus series pneumatic-hydraulic riveting tools
taurus 1 p/n 756 0001	taurus 2 p/n 757 0007	taurus 3 p/n 758 0002	taurus 4 p/n 759 0001
main features at a glance
technical characteristics
taurus 1	taurus 2	taurus 3	taurus 4
working range: up to 4mm ø alu/steel weight: 1,3 kg setting force (at 5 bar): 4.200 n performance/weight ratio: 3.230 n/kg operating air pressure: 5 to 7 bar usable stroke: 15mm air consumption: approx. 1,0 litre per rivet noise emission: 77 db vibrations: < 2,5 m/s2	working range: up to 5mmø all materials and 6mm ø alu/steel weight: 1,6 kg setting force (at 5 bar): 9.000 n performance/weight ratiot: 5.625 n/kg operating air pressure: 5 to 7 bar usable stroke: 18mm air consumption: approx. 2,3 litres per rivet noise emission: 78 db vibrations: < 2,5 m/s2	working range: up to 6,4mm ø all materials weight: 1,9 kg setting force (at 5 bar): 14.000 n performance/weight ratio: 7.370 n/kg operating air pressure: 5 to 7 bar usable stroke: 25mm air consumption: approx 4,8 litres per rivet noise emission: 79 db vibrations: < 2,5 m/s2	working range: up to 6,4mm ø all materials, and 8mm alu weight: 2,0 kg setting force (at 5 bar): 20.000 n performance/weight ratio: 10.000 n/kg operating air pressure: 5 to 7 bar usable stroke: 19mm air consumption: approx 4,8 litres per rivet noise emission: 79 db vibrations: < 2,5 m/s2
e and accessories
nosepiece in working position: 17/18 nosepieces in tool base: 17/24 and 17/27 wrench sw 12/14 wrench sw 14/17 hydraulic oil 100 ml oil filling container	nosepiece in working position: 17/27 nosepieces in tool base: 17/29,17/32 and 17/36 wrench sw 12/14 wrench sw 14/17 hydraulic oil 100 ml oil filling container	nose piece in working position: 17/36 nosepieces in tool base: 17/40 and 17/45 wrench sw 12/14 wrench sw 14/17 hydraulic oil 100 ml oil filling container	nose piece in working position: 17/36 nosepieces in tool base: 17/40 and 17/45 wrench sw 12/14 wrench sw 14/17 hydraulic oil 100 ml oil filling container

accessories to the taurus series

extension units
	1.purpose the nose extension units are used to reach recessed riveting locations.two different lengthes are available for all taurus tools : a 50 mm (2“) extension and a 100 mm (4“) extension.

taurus 1nose extension unit 50 mm p/n: 756 2013taurus 1nose extension unit 100 mm p/n: 756 2015taurus 2nose extension unit 50 mm p/n: 757 1016taurus 2nose extension unit 100 mm p/n: 757 1019taurus 3nose extension unit 50 mm p/n: 758 1021taurus 3nose extension unit 100 mm p/n: 758 1023taurus 4nose extension unit 50 mm p/n: 758 1021taurus 4nose extension unit 100 mm p/n: 758 10231.designeach nose extension unit consists of 3 parts: ·50 mm or 100 mm extended head·50 or 100 mm extended jaw pusher·50 or 100 mm complete transition pieceafter installation the total available head length is 106 mm (4,17”) with the 50 mm extension and 156 mm (6,17”) with the 100 mm extension, without any diameter increase.2.installationthe nose extension units can be installed without any special tool, only with the wrench included in the package.3.spare partsall spare parts for the nose extension units can be ordered as follows :download product information in pdf format

swivel air supply line connector
p/n 756 1023

1.purpose and installationthe swivel air connector is used to increase the freedom of movement of the tool around its air supply line connection. two different installations are possible. (see also the operating instructions).·on the rear air inlet:-unscrew the hose with its fitting and sealing ring (parts 64 und 89)-screw the swivel connector with sealing ring into place-screw the hose fitting with its sealing ring into the rear plug of the swivel connector .·on the side air inlet: -unscrew the hose with its fitting and sealing ring .-unscrew the safety valve with its sealing ring (parts 89;90)-proceed as above to install the swivel connector and the air supply hose-screw the safety valve with ist sealing ring into the rear air inlet.2. scope of deliverythe complete swivel connector includes the swivel connector itself, as well as its sealing ring.