插座拔出力试验装置MF-1 插座拔出力测试机

插座拔出力试验装置 MF-1 Apparatus for verification of maximum and minimum force MF-1 产品概述： 本装置符合GB2099.1-2008图18/19、IEC884图18/19、VDE0620等标准要求，适用于检验将插头从插座拔出所需要的Zui大力及单极插销从插套组件拔出的所需要的Zui小力是否在标准规定的范围内； 配置：二极10A、三极10A和16A试验标准插头各一个； 10A、16A试验标准插销各一个； 砝码、夹紧装置一套。 Products Information Apparatus for verification of maximum and minimum force MF-1 Product details: Model MF-1.The HT Socket and Plug Strength Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. The clamping system is easy to operate. The top plate swivels up from a horizontal position to a vertical orientation and the clamping device can be rotated in the top plate. These features allow the device to be set up in many different configurations to meet different standard requirements. Standard plugs and weights are supplied to perform testing on sockets rated up to 16A. Pin gauges and the appropriate weights for testing minimum withdrawal force are sold separately. The required dimension of the pin gauge need to be specified by the customer. Test plugs made from hardened steel with roughness not exceeding 0.8mm. Top plate pivots from horizontal to vertical.