免费发布

乐泰496原装瞬干胶水

信息编号:1874040 浏览:65次
供应商
深圳市鹏科泰贸易有限公司 商铺
认证
报价
人民币¥35.00元每支
型号
496
粘合材料类型
塑料类、橡胶类、金属类、其他材质、其他
品牌
乐泰
所在地
深圳市南山区粤海街道南海大道保利城花园3A-2203A
联系电话
0755-86381816
联系人
香仕妮  请说明来自顺企网,优惠更多
让卖家联系我

产品详细介绍

型号:496 粘合材料类型:塑料类、橡胶类、金属类、其他材质、其他 品牌:乐泰
树脂胶的分类:氰基丙烯酸甲酯 剪切强度:25(MPa) 有效物质≥:100(%)
工作温度:25(℃) 保质期:21(个月) 执行标准:COC
CAS:NA 典型黏度:125(cps) 完全固化时间:24(h)

具体价格请来电洽谈0755-86381816

乐泰496

包装规格:20g瓶装

主要粘贴材料:金属,塑料,橡胶

颜色:无色

类型:甲基

粘度:100/150

固化速度:30秒/24小时

剪切强度:20/30

相对密度:1.1

remove affected person to fresh air, and if still feeling unwell seek medical attention.
first aid - skin
do not pull bonded skin apart. it may be gently peeled apart using a blunt object such as a spoon,
preferably after soaking in warm soapy water. cyanoacrylates give off heat on solidification. in rare
cases a large drop will generate enough heat to cause a burn. burns should be treated normally
after the adhesive has been removed from the skin.
if lips are accidentally stuck together apply warm water to the lips and encourage maximum wetting
and pressure from saliva inside the mouth. peel or roll lips apart. do not try to pull the lips apart
with direct opposing action.
first aid - eyes
if the eye is bonded closed, release eyelashes with warm water by covering with wet pad.
cyanoacrylate will bond to eye protein causing lachrymatory effect which will help to debond
adhesive. keep eye covered until debonding is complete, usually within 1-3 days. do not force eye
open. medical advice should be sought in case solid particles of cyanoacrylate trapped behind the
eyelid cause any abrasive damage.
first aid - ingestion
ensure that breathing passages are not obstructed. the product will polymerise immediately in the
mouth making it almost impossible to swallow. saliva will slowly separate the solidified product
from the mouth (several hours).

non flammable product (flash point is greater than 80°c (cc)). if product is involved in fire
extinguish with dry powder, foam or carbon dioxide. trace amounts of toxic fumes may be released

5. fire fighting measures
on incineration and the use of breathing apparatus is recommended.
6. accidental release measures
ventilate area. do not use cloths for mopping up. polymerise with water and scrape off floor.
7. handling and storage
handling
ventilation (low level) is recommended when using large volumes. use of dispensing e is
recommended to minimise the risk of skin or eye contact.
storage
for optimum shelf life store in original containers under refrigerated conditions at 2°c to 8°c.

8. exposure controls / personal protection
occupational exposure limits
methyl cyanoacrylate hsa (1999) c.o.p : oel 2ppm (8mg/m3) 8h twa.
hsa (1999) c.o.p : oel 4ppm (16mg/m3) 15 min
exposure limit.
acgih: tlv 0.2ppm 8h twa.
polyethylene or polypropylene gloves are recommended when using large volumes. do not use
pvc, rubber, nylon or cotton gloves. eye protection should be used where there is any risk of
splashing.

9. physical and chemical properties
physical state liquid.
colour clear colourless.
odour sharp. characteristic.
ph not applicable.
boiling range/point (°c) boils above 100.
flash point (cc) (°c) exceeds 80.
specific gravity 1.1 at 20 °c.
solubility in water (kg/m³) immiscible.
solubility in acetone not applicable.
vapour pressure (mmhg
@25°c)
less than 0.5 at 25 °c.
explosion limits (%) not determined.
10. stability and reactivity
polymerisation will occur in the presence of moisture.
11. toxicological information
inhalation
irritating to respiratory system. in dry atmosphere with < 50% humidity, vapours may irritate the
eyes and respiratory system. prolonged exposure to high concentrations of vapours may lead to
chronic effects in sensitive individuals.
skin
this product is classified as a skin irritant. bonds skin in seconds. considered to be of low11. toxicological information
toxicity: acute dermal ld50 (rabbit)>2000mg/kg. due to polymerisation at the skin surface
allergic reaction is not considered possible.
eyes
this product is an irritant to the eyes. liquid product will bond eyelids. in a dry atmosphere
(rh<50%) vapours may cause irritation and lachrymatory effect.
ingestion
cyanoacrylates are considered to have relatively low toxicity. acute oral ld50 is >5000mg/kg (rat).
it is almost impossible to swallow as it rapidly polymerises in the mouth.

优势方面

我们只提供原装汉高乐泰、道康宁、3m、迈图等产品,我们为广大客户朋友提供极具竞争优势的价格。

汉高乐泰是全球胶粘剂技术和品牌市场。

道康宁、迈图是全球硅胶领域的市场。

3m是全球胶带、环氧胶、结构胶等领域的市场。

我们是专业胶粘剂及施胶设备整体解决方案供应商,我们不止卖产品,我们更为客户提供全面而专业的售前指导和售后服务工作,直至广大客户的项目正常运转!

欲知更多产品详情,欢迎咨询深圳市鹏科泰贸易有限公司

网址:http://pengketai.cn.alibaba.com/

电话:0755-86381816

传真:0755-86381822

所属分类:中国精细化学品网 / 瞬间胶
本页链接:http://product.11467.com/info/1874040.htm
乐泰496原装瞬干胶水的文档下载: PDF DOC TXT
关于深圳市鹏科泰贸易有限公司商铺首页 | 更多产品 | 联系方式 | 黄页介绍
主要经营:乐泰胶水;瞬干胶;厌氧胶;硅橡胶;结构胶;促进剂;表面处理剂;液体螺纹销固剂;液体管螺纹密封剂;圆柱形部件固持胶;底剂;清洗剂;促进剂;活化剂;除锈剂;紫外线固化胶;固体螺纹锁固胶棒;固体管螺纹密封胶棒;道康宁;3M
深圳市鹏科泰贸易有限公司是一家专业从事粘合剂、密封剂和表面处理领域销售及技术服务的公司,为有需要的客户提供全面的胶粘技术及设备整体解决方案。公司秉承“为人至 ...
相关文章
  • 乐泰243厌氧型螺纹锁固
    产品简介乐泰产品243是一种单组分,触变性,中等强度,厌氧型螺纹锁固胶。本产品在隔绝空气的条件下,在...
  • 乐泰248厌氧型螺纹锁固
    产品说明loctite®248具有下列性能loctite®248乐泰产品248中强度...
  • 创业小故事
    马云创业经历马云-阿里巴巴创始人,被称为“创业教父”。曾经的创业艰辛、近日的...
  • 乐泰262厌氧型螺纹锁固
    产品简介乐泰产品262是一种单组分,触变性,中高强度,厌氧型螺纹锁固胶。本产品隔绝空气的条件下,在两...
  • 乐泰736表面活化剂
    产品简介乐泰产品736是一种溶剂型的表面活化剂。该产品主要用于加速乐泰厌氧结构胶粘剂和密封胶的固化。...
我们的其他产品
顺企网 | 公司 | 黄页 | 产品 | 采购 | 资讯 | 免费注册 轻松建站
免责声明:本站信息由企业自行发布,本站完全免费,交易请核实资质,谨防诈骗,如有侵权请联系我们   法律声明  联系顺企网
© 11467.com 顺企网 版权所有
ICP备案: 粤B2-20160116 / 粤ICP备12079258号 / 粤公网安备 44030702000007号 / 互联网药品信息许可证:(粤)—经营性—2023—0112