(Free Sample Online)Kapton PCB Insulation Film FEP/F46 Adhes

 Polyimide FEP(F46) film (similar to Kapton FN) is made of coating Polyimide film with FEP resin(F46) on one side(FH) or double sides(FHF) and through the sintering process at high temperature, which combines the excellent properties of Polyimide film and FEP resin of high& low temp resistant, radiation resistant, corrosion resistant, excellent electrical properties, superior dimensional stability and heat sealable properties. It performs successfully in the wide range of temperature as low as -112F(-80c) and as high as +500F(+260c). Polyimide FEP(F46) film (similar to Kapton FN) widely used for insulation in motor, electrical apparatus and wrapping of cable and magnet wire, heater manufacture etc.

Characters:

* Higher mechanical strength, better dielectric strength with thinner insulation ply;

* Excellent heat resistance ,used as class- H insulation and can work for a long term at

180°C but short time at 260°C;

* Good flexibility, better tear resistance and excellent workability, and can be glued on the

different-sized workpieces;

* Self-sticking and good bonding strength , no removal after stripping off;

* Different thickness and width to meet customers’ specific requirements;

Application

Electrical and Electronics, circuit board manufactureH grade electric engine, transformer coil and capacitor insulation wrapping up in high-temperature, high-voltage conditionSMT thermal resistance, golden finger protection of PCB boardHigh temperature resistance and waterproof for electronic transformer

Specification

1. Other construction is available upon request; FEP layer thickness: 0.01mm +/-10%

2. Width: 10 ~ 520mm; Core ID:76mm; Roll OD:200~240mm

3. Min Qty: 50kgs each size in a lot.

Our Factory Competitive Advantages

About factory:

Jiangsu Yabao Insualtion Material Co., Ltd. was established in 1986, 

specializing in producing insulation materials: i.e. 

Packing

The tape roll and disc should be rolled up on a pipe core whose internal diameter is about 76mm, and then the tape roll and disc should be packed into a plastic bag with good sealing, and then be transported into a wooden box with damp-proof paper or into a dry and clean carton.